Home › BODY ELECTRICAL › DOOR LOCK › DOOR CONTROL SWITCH

DOOR CONTROL SWITCH > INSPECTION

for Preparation Click here



1. INSPECT DOOR CONTROL SWITCH


B071970E16
  1. Measure the resistance of the switch.

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    3 - 6
    Lock
    Below 1 Ω
    3 - 5
    Unlock
    3 - 6
    OFF
    10 kΩ or higher
    3 - 5

    If the result is not as specified, replace the switch.