Home › SUSPENSION & AXLE › TIRE AND WHEEL › TIRE PRESSURE WARNING VALVE AND TRANSMITTER

TIRE PRESSURE WARNING VALVE AND TRANSMITTER > DISPOSAL

for Preparation Click here


HINT:
The tire pressure monitor valve is powered by a lithium battery. When disposing of the tire pressure monitor valve, remove the battery and dispose of it correctly.



1. DISPOSE OF TIRE PRESSURE WARNING VALVE SUB-ASSEMBLY


C128511
  1. Using a screwdriver, pry off the cover. Remove the back cover.



    C128512E01
  1. The battery and base board covered with resin are exposed. While taking out the battery, cut the 2 terminals which connect the battery and base board.