Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM

NAVIGATION SYSTEM > BLUETOOTH TEL CHECK MODE

for Preparation Click here


HINT:
Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed area may not be shown the same as on the actual vehicle.


ENTER DIAGNOSTIC MODE (Click here)

BLUETOOTH TEL CHECK


    E120062
  1. Select "Bluetooth TEL Check" from the "Diagnosis MENU" screen.


BLUETOOTH CHECK


    E120063
  1. Select "Bluetooth Check" from the "Bluetooth Handsfree Check Menu" screen.



  2. E120064
  3. Select "Serial Communication Log" from the "Bluetooth Check Menu" screen



      E120065
    1. The communication log data in the multi-display are displayed on this screen.

      HINT:
      The displayed data can be used as a reference.



  4. E120066
  5. Select "Software Version" from the "Bluetooth Check Menu" screen.



      E120067E02
    1. Check the software version of the Bluetooth module.

      Screen description: 
      Display
      Contents
      General Version/*1
      1. Overalll software version of Bluetooth module
      2. If any of the API version, upper stack version, and low stack version is updated, the general version is upgraded.
      API Version/*2
      API software version is displayed.
      Upper Stack Version/*3
      Upper Stack version is displayed.
      Lower Stack Version/*4
      Lower Stack version is displayed.

      HINT:
      This function is controlled by the multi-display.


HANDSFREE VOICE QUALITY SET


    E120068
  1. Select "Handsfree Voice Quality Set" from the "Bluetooth Handsfree Check Menu" screen.



  2. E120069E01
  3. Check the handsfree voice level.

    Screen description: 
    Display
    Contents
    Received voice level adjustment/*1
    Setting possible for the voice level received from Bluetooth compatible phones.
    Sent voice level adjustment/*2
    Setting possible for the voice sent to Bluetooth compatible phones.

    HINT:
    This function is controlled by the multi-display.

    NOTICE:
    "Voice Quality Type" should not be changed.