Home › BODY ELECTRICAL › OTHER SYSTEM › CLOCK

CLOCK > REMOVAL



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY


B074044E02
  1. Detach the 2 claws and 4 clips, and remove the instrument panel register.



3. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY


B074047E02
  1. Detach the claw and 5 clips.

  1. Disconnect the connector and remove the instrument panel register.



4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


B074045E02
  1. Remove the 2 screws.

  1. Disconnect the hood lock control cable.

  1. Detach the 4 claws and 5 clips.

  1. Disconnect all connectors and remove the instrument panel finish panel.



5. REMOVE UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


B074046E02
  1. Detach the 3 claws and 4 clips.

  1. Disconnect the connector and remove the instrument panel finish panel.



6. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY


B074048E02
  1. Detach the 6 clips and remove the instrument panel register.



7. REMOVE MULTI-DISPLAY ASSEMBLY


8. REMOVE CLOCK ASSEMBLY


B074089E04
  1. Detach the 2 claws and remove the clock.