Home › ENGINE › 1NZ-FXE STARTING › KEY SLOT

KEY SLOT > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY


B074047E05
  1. Detach the claw and 5 clips.

  1. Disconnect the connector and remove the instrument panel register.



3. REMOVE KEY SLOT
  1. Remove the 2 screws and key slot.