Home › BODY › ENGINE HOOD / DOOR › BACK DOOR

BACK DOOR > ADJUSTMENT

for Preparation Click here


HINT:
A bolt without a torque specification is shown in the standard bolt chart (Click here).



1. ADJUST BACK DOOR


    B075167E01
  1. Loosen the door side's hinge bolts and adjust the back door panel's top end.

  1. Tighten the door side's hinge bolts after the adjustment.

    Torque:
    15 N*m{ 153 kgf*cm , 11 ft.*lbf }



    B075752E01
  1. Loosen the back door's lock bolts and change the position of the back door lock to adjust back door panel's end.

    NOTICE:
    Tap the base of the back door lock to change its position.

  1. Tighten the 3 back door lock bolts after the adjustment.

    Torque:
    7.5 N*m{ 76 kgf*cm , 75 in.*lbf }