Home › BODY › ENGINE HOOD / DOOR › BACK DOOR SUPPORT

BACK DOOR SUPPORT > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedures for the RH side and LH side.
  2. The procedures listed below are for the LH side.



1. INSTALL BACK DOOR STAY ASSEMBLY LH


    B079436E01
  1. Install the stay bracket with the 2 bolts.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf } for bolt labeled B

  1. Install the back door stay bolt to the back door.

    Torque:
    22.0 N*m{ 224 kgf*cm , 16 ft.*lbf } for bolt labeled A

  1. Install the stay with the 2 stop rings.