Home › BODY › ENGINE HOOD / DOOR › BACK DOOR SUPPORT

BACK DOOR SUPPORT > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedures for the RH side and LH side.
  2. The procedures listed below are for the LH side.



1. REMOVE BACK DOOR STAY ASSEMBLY LH


    B079435E03
  1. Using a screwdriver, remove the 2 stop rings and stay.

  1. Remove the bolt labeled A from the door panel.

    HINT:
    Remove the door stay while supporting the back door with your hands.

  1. Remove the 2 bolts labeled B and stay bracket from the body panel.