CANISTER > INSPECTION |
| 1. INSPECT CANISTER |
![]() |
Check the appearance.
Check that there are no cracks or damage on the indicated portions of the canister.
If there are any defects, replace the canister.
![]() |
Check the ventilation.
Disconnect the charcoal canister hose from the canister.
Remove the No. 1 canister outlet hose from the canister.
![]() |
Check that there is ventilation from port B when air of 4.9 kPa (50 gf/cm2, 0.71 psi) is applied to port A with the port C plugged with your finger.
If there is no ventilation, replace the canister.
![]() |
Check that there is ventilation from ports B and C when air (4.9 kPa (50 gf/cm2, 0.71 psi)) is applied to canister vent hose.
If there is no ventilation, replace the canister.