Home › BODY ELECTRICAL › PARK ASSIST / MONITORING › TELEVISION CAMERA

TELEVISION CAMERA > REMOVAL

for Preparation Click here



1. REMOVE BACK DOOR LOWER TRIM BOARD ASSEMBLY
  1. Using a screwdriver, detach the 11 clips and remove the lower trim board.

    HINT:
    Tape the screwdriver tip before use.



2. REMOVE BACK DOOR OUTSIDE GARNISH
  1. Disconnect the back door opener switch connector.



  1. Remove the 4 nuts.


    B133842E01

  1. Using a screwdriver, detach the 2 clips and remove the garnish (with back door opener switch).

    HINT:
    Tape the screwdriver tip before use.



    B067629E01
  1. Remove the 2 screws and back door opener switch from the garnish.



3. REMOVE TELEVISION CAMERA ASSEMBLY
  1. Disconnect the television camera connector.



    E125756
  1. Remove the 2 screws.



    E141625
  1. Disengage the 2 claws and remove the television camera assembly.