RADIO RECEIVER > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY |
![]() |
Detach the claw and 5 clips.
Disconnect the connector and remove the instrument panel register.
| 3. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY |
![]() |
Detach the 6 clips and remove the instrument panel register.
| 4. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY CENTER |
![]() |
Remove the 2 screws.
Detach the 4 clips and remove the instrument cluster finish panel.
| 5. REMOVE MULTI-DISPLAY ASSEMBLY |
![]() |
Remove the 2 bolts.
Disconnect the connector and remove the multi-display.
| 6. REMOVE RADIO RECEIVER WITH BRACKET |
![]() |
Remove the 4 screws.
Disconnect the connector and remove the radio receiver w/ bracket.
| 7. REMOVE NO. 1 RADIO BRACKET |
![]() |
Remove the 6 screws and No. 1 radio bracket.
| 8. REMOVE NO. 2 RADIO BRACKET |
![]() |
Remove the 6 screws and No. 2 radio bracket.