FRONT DOOR SPEAKER > INSTALLATION |
| 1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY |
![]() |
Using an air riveter or hand riveter, install the speaker with 3 new rivets.
![]() |
![]() |
![]() |
Connect the connector.
| 2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH |
![]() |
Attach the 7 clips to install the trim board.
Install the screw.
| 3. INSTALL FRONT ARMREST BASE PANEL UPPER LH |
for Driver's Side:
Install the window regulator master switch to the armrest upper base panel with the 3 screws.
Connect the switch connector.
![]() |
Attach the 2 clips and 4 claws to install the armrest base panel (with the window regulator master switch).
for Passenger's Side:
Attach the 2 claws to install the power window regulator switch.
Attach the 2 claws to install the door control switch.
Connect the connector.
![]() |
Attach the 2 clips and 4 claws to install the armrest upper base panel together with the 2 switches.
| 4. INSTALL DOOR PULL HANDLE |
![]() |
Install the pull handle with the screw.
| 5. INSTALL FRONT DOOR INSIDE HANDLE BEZEL LH |
![]() |
Attach the 3 claws to install the bezel.
| 6. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY |
![]() |
Attach the 3 claws to install the speaker.
| 7. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH |
![]() |
Attach the 2 clips to install the garnish.