Home › BODY ELECTRICAL › NAVIGATION › MULTI-DISPLAY

MULTI-DISPLAY > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY


B074047E02
  1. Detach the claw and 5 clips.

  1. Disconnect the connector and remove the instrument panel register.



3. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY


B074048E02
  1. Detach the 6 clips and remove the instrument panel register.



4. REMOVE MULTI-DISPLAY ASSEMBLY


    I039616E01
  1. Remove the 2 bolts.

  1. Disconnect the connector and remove the multi-display.