Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION ECU

NAVIGATION ECU > INSTALLATION

for Preparation Click here



1. INSTALL NO. 2 DISC PLAYER BRACKET


    I039614E01
  1. Install the bracket with the 2 bolts.



2. INSTALL NO. 1 DISC PLAYER BRACKET


    I039613E01
  1. Install the bracket with the 2 bolts.



3. INSTALL NAVIGATION ECU WITH BRACKET


    I039612E01
  1. Install the navigation ECU with the 3 bolts.

  1. Connect the connector.



4. INSTALL NAVIGATION ECU COVER


    I039611E01
  1. Install the cover and attach the 2 clips.



5. INSTALL FRONT SEAT ASSEMBLY LH
  1. Place the seat in the cabin.

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Connect the connectors under the seat.

  1. Install the 2 bolts on the front side of the seat.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

  1. Install the 2 bolts on the rear side of the seat.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }



6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


7. PERFORM INITIALIZATION
  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.