Home › HYBRID SYSTEM › HYBRID TRANSMISSION / TRANSAXLE › SHIFT CONTROL ACTUATOR

SHIFT CONTROL ACTUATOR > INSTALLATION

for Preparation Click here



1. INSTALL SHIFT CONTROL ACTUATOR ASSEMBLY


    G030526E01
  1. Apply a small amount of ATF WS to the O-ring.



    Z035712E01
  1. Install the shift control actuator to the hybrid vehicle transaxle with the 3 bolts.

    Torque:
    16 N*m{ 163 kgf*cm , 12 ft.*lbf }



    C098379E02
  1. Install the transmission case cover to the hybrid vehicle transaxle with the 3 bolts.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }

  1. Connect the connector.