Home › HYBRID SYSTEM › HYBRID TRANSMISSION / TRANSAXLE › INPUT SHAFT

INPUT SHAFT > DISASSEMBLY

for Preparation Click here



1. REMOVE PLANETARY SUN GEAR SUB-ASSEMBLY


    C069341E01
  1. Remove the planetary sun gear from the input shaft.



2. REMOVE INPUT SHAFT THRUST BEARING RACE


    C069342E01
  1. Float the input shaft thrust bearing race using a thin flat-head screwdriver if it is attached to the planetary sun gear.



    C069343E01
  1. Remove the 2 input shaft thrust bearing races and input shaft thrust needle roller bearing.