Home › HYBRID SYSTEM › HYBRID TRANSMISSION / TRANSAXLE › SPROCKET DRIVEN GEAR AND COUNTER DRIVE GEAR

SPROCKET DRIVEN GEAR AND COUNTER DRIVE GEAR > REASSEMBLY

for Preparation Click here



1. INSTALL COUNTER DRIVE GEAR RADIAL BALL BEARING
  1. Apply ATF WS to the 2 bearings.



    C069350E01
  1. Using SST and a press, press in the bearing to the counter drive gear.

    SST
    09950-60010   (09951-00330, 09951-00460)
    09950-70010   (09951-07100)



    C069351E01
  1. Using SST and a press, press in the bearing to the counter drive gear.

    SST
    09950-60010   (09951-00330, 09951-00460)
    09950-70010   (09951-07100)