Home › HYBRID SYSTEM › HYBRID TRANSMISSION / TRANSAXLE › DIFFERENTIAL DRIVE PINION

DIFFERENTIAL DRIVE PINION > REASSEMBLY

for Preparation Click here



1. INSTALL COUNTER DRIVE GEAR RADIAL BALL BEARING


    G030579E01
  1. Using SST and a press, press in the bearing to the differential drive pinion.

    SST
    09608-06041  



    G030580E01
  1. Using SST and a press, press in the bearing to the differential drive pinion.

    SST
    09608-06041  
    09950-60010   (09951-00370)



    G030576E01
  1. Set the differential drive pinion in a vise and tighten a new nut using a deep socket wrench.

    Torque:
    280 N*m{ 2,860 kgf*cm , 207 ft.*lbf }

    HINT:
    Set the vise as shown in the illustration.



    C099559E01
  1. Stake the nut.