Home › HYBRID SYSTEM › HYBRID TRANSMISSION / TRANSAXLE › SHIFT LEVER

SHIFT LEVER > INSTALLATION

for Preparation Click here



1. INSTALL SHIFT LEVER ASSEMBLY


    G021871E01
  1. Connect the 2 connectors to the shift lever.

  1. Install the shift lever with the 3 bolts.

    Torque:
    12 N*m{ 122 kgf*cm , 9 ft.*lbf }



2. INSPECT SHIFT LEVER ASSEMBLY
  1. Inspect the shift lever .



3. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY


B074047E03
  1. Connect the connector.

  1. Attach the claw and 5 clips to install the instrument panel register.



4. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


B074046E03
  1. Connect the connector.

  1. Attach the 3 claws and 4 clips to install the instrument panel finish panel.



5. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


B074045E03
  1. Connect the connectors.

  1. Attach the 4 claws and 5 clips to install the instrument panel finish panel.

  1. Connect the hood lock control cable.

  1. Install the 2 screws.



6. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY


B074044E03
  1. Attach the 2 claws and 4 clips to install the instrument panel register.