Home › HYBRID SYSTEM › HYBRID TRANSMISSION / TRANSAXLE › SHIFT LEVER

SHIFT LEVER > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY


B074044E02
  1. Detach the 2 claws and 4 clips, and remove the instrument panel register.



2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


B074045E02
  1. Remove the 2 screws.

  1. Disconnect the hood lock control cable.

  1. Detach the 4 claws and 5 clips.

  1. Disconnect all connectors and remove the instrument panel finish panel.



3. REMOVE UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


B074046E02
  1. Detach the 3 claws and 4 clips.

  1. Disconnect the connector and remove the instrument panel finish panel.



4. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY


B074047E02
  1. Detach the claw and 5 clips.

  1. Disconnect the connector and remove the instrument panel register.



5. REMOVE SHIFT LEVER ASSEMBLY


    G021871E01
  1. Remove the 3 bolts.

  1. Disconnect the 2 connectors and remove the shift lever.