Home › HYBRID SYSTEM › P112 HYBRID VEHICLE CONTROL › WATER PUMP WITH MOTOR

WATER PUMP WITH MOTOR > INSPECTION

for Preparation Click here



1. INSPECT WATER PUMP WITH MOTOR


    A053155E02
  1. Check the operation.

    1. Connect the battery positive terminal to terminal 1 and the battery negative terminal to terminal 2.

      Specified condition:
      Pump motor operates properly

      NOTICE:
      1. Do not connect the positive and negative terminals of the battery to the wrong water pump terminals.
      2. Complete the check within 10 seconds of the connection.

      If the pump motor does not operate properly, replace the water pump with motor assembly.