Home › HYBRID SYSTEM › P112 HYBRID BATTERY CONTROL › BATTERY BLOWER RELAY

BATTERY BLOWER RELAY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT BATTERY BLOWER RELAY


    B060778E14
  1. Measure the battery blower relay resistance.

    Standard resistance:
    Tester Connection
    Specified Condition
    3 - 5
    10 kΩ or higher
    3 - 5
    Below 1 Ω
    (when battery voltage is applied to terminals 1 and 2)

    If the result is not as specified, replace the relay.