Home › BODY ELECTRICAL › LIGHTING › FRONT DOOR COURTESY SWITCH

FRONT DOOR COURTESY SWITCH > INSPECTION

for Preparation Click here



1. INSPECT FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY


E071371E06
  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - Body ground
    OFF
    10 kΩ or higher
    1 - Body ground
    ON
    Below 1 Ω

    If the result is not as specified, replace the switch assembly.