Home › BODY ELECTRICAL › LIGHTING › HIGH MOUNTED STOP LIGHT ASSEMBLY

HIGH MOUNTED STOP LIGHT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL BACK DOOR TRIM UPPER PANEL ASSEMBLY


B075176E03
  1. Attach the 11 clips to install the trim panel.



2. INSTALL CENTER STOP LIGHT ASSEMBLY


E071102E01
  1. Install the center stop light with 2 screws.

  1. Connect the connector.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


4. PERFORM INITIALIZATION
  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.