Home › BODY › WINDSHIELD / WINDOWGLASS › WINDOW DEFOGGER SYSTEM

WINDOW DEFOGGER SYSTEM > INSPECTION

for Preparation Click here



1. CHECK STEERING PAD SWITCH
  1. Remove the horn button .



    B076011E01
  1. Disconnect the connector as shown in the illustration.



    B075103E04
  1. Measure the resistance of the switch.

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    3 (AC1) - 7 (EAC)
    OFF
    29 to 31 kΩ
    3 (AC1) - 7 (EAC)
    ON
    290 to 305 Ω

    If the result is not as specified, replace the switch.