TIRE PRESSURE WARNING RESET SWITCH > INSTALLATION |
| 1. INSTALL TIRE PRESSURE WARNING RESET SWITCH |
![]() |
Engage the 2 claws to install the tire pressure warning reset switch to the instrument panel finish panel sub-assembly lower.
| 2. INSTALL INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER |
![]() |
Connect the connectors.
Attach the 4 claws and 5 clips to install the instrument panel finish panel.
Connect the hood lock control cable.
Install the 2 screws.
| 3. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY |
![]() |
Attach the 2 claws and 4 clips to install the instrument panel register.
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 5. INSPECT TIRE PRESSURE WARNING SYSTEM |