Home › BODY ELECTRICAL › AUDIO / VISUAL › RADIO RECEIVER

RADIO RECEIVER > INSTALLATION

for Preparation Click here



1. INSTALL NO. 2 RADIO BRACKET


I038868E01
  1. Install the No. 2 radio bracket to the radio receiver with the 6 screws.



2. INSTALL NO. 1 RADIO BRACKET


I038867E01
  1. Install the No. 1 radio bracket to the radio receiver with the 6 screws.



3. INSTALL RADIO RECEIVER WITH BRACKET


I038866E01
  1. Connect all the connectors and install the radio receiver.

  1. Install the 4 screws.



4. INSTALL MULTI-DISPLAY ASSEMBLY


I039616E01
  1. Connect the connector and install the multi-display.

  1. Install the 2 bolts.



5. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY CENTER


B074060E03
  1. Attach the 4 claws and 2 clips to install the instrument cluster finish panel.

  1. Install the 2 screws.



6. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY


B074048E03
  1. Attach the 6 clips to install the instrument panel register.



7. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY


B074047E03
  1. Connect the connector.

  1. Attach the claw and 5 clips to install the instrument panel register.



8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


9. PERFORM INITIALIZATION
  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.