MICROPHONE AMPLIFIER > INSTALLATION |
| 1. INSTALL MICROPHONE AMPLIFIER ASSEMBLY |
Install the microphone amplifier.
![]() |
Connect the connector.
![]() |
Attach the 4 claws to install the amplifier cover.
![]() |
Install the print board with the 3 screws.
| 2. INSTALL MAP LIGHT ASSEMBLY |
Connect the map light connector.
![]() |
Attach the 4 clips to install the map light.
Install the 2 screws.
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 4. PERFORM INITIALIZATION |
Perform initialization (Click here).