Home › BODY ELECTRICAL › LIGHTING › ROOM LIGHT ASSEMBLY

ROOM LIGHT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL ROOM NO. 1 LIGHT BULB
  1. Install the bulb to the room No. 1 light.



2. INSTALL ROOM NO. 1 LIGHT ASSEMBLY
  1. Connect the room light connector.



    B073597E02
  1. Attach the 4 claws to install the room light.



    B076772E04
  1. Attach the 4 claws to install the room light lens.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


4. PERFORM INITIALIZATION
  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.