Home › INTRODUCTION › INTRODUCTION › REPAIR INSTRUCTION

REPAIR INSTRUCTION > CUSTOMIZE PARAMETERS


HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.


AIR CONDITIONING SYSTEM

Air conditioning amplifier 
Display
Default
Contents
Setting
Set Temperature Shift
NORMAL
To control with the shifted temperature against the display temperature.
+2C / +1C / NORMAL / -1C / -2C
Air Inlet Mode
AUTO
In case of turning the A/C ON when you desire to make the compartment cool down quickly, this is the function to change the mode automatically to RECIRCULATED mode.
MANUAL / AUTO
Compressor Mode
AUTO
Function to turn the A/C ON automatically by pressing the AUTO button when the blower is ON and the A/C is OFF.
MANUAL / AUTO
Compressor/Air Inlet DEF Operation
LINK
Function to turn the A/C ON automatically linking with the FRONT DEF button when the A/C is OFF.
NORMAL / LINK
Foot/DEF Auto Mode
ON
Function to turn the air flow from FOOT/DEF to ON automatically when AUTO MODE is ON.
OFF / ON
Foot/DEF Automatic Blow Up Function
ON
Function to switch the blower level automatically when the defroster is ON.
OFF / ON
Foot Air Leak
ON
Function to cut off the airstream felt underfoot while the vehicle is moving.
OFF / ON
Ambient Temperature Shift
NORMAL
To control with the shifted ambient temperature against the display ambient temperature.
+3C / +2C / +1C / NORMAL / -1C / -2C / -3C

THEFT DETERRENT SYSTEM

Security 
Display (Item)
Default
Contents
Setting
Passive Mode
OFF
PASSIVE MODE is a function that switches theft deterrent system from arming preparation state to armed state 30 seconds after key is removed from key slot and all doors is closed, even if doors are not locked by wireless or door key lock operation.
In PASSIVE MODE, theft deterrent system will judge that a theft is taking place and switch to alarm sounding state if one of the following operations are not performed within 14 seconds (see ENTRY DELAY below) after door is opened:
  1. Unlock any door by key or wireless operation
  2. Reconnect battery
  3. Insert key into key slot and turn power switch ON (IG)
ON / OFF
Warning by Horn
ON
Function that allows vehicle horn and theft deterrent horn to be able to be used and a warning device
ON / OFF
Entry Delay Time
14 s
Function that changes entry delay time (time before warning states)
0 s/14 s/ 30 s
Warning by Glass Sen
ON
Function that turns glass broken sensor ON/OFF
ON / OFF

LIGHTING SYSTEM
●: w/ Daytime running light

Illuminated entry 
Display (Item)
Default
Contents
Setting
Lighting Time
15 s
Changes lighting time after closing doors (light quickly fades out when power switch is turned ON (IG)
7.5 s / 15 s / 30 s
Battery Saver
ON
Illumination AUTO OFF ON function to turn off interior light automatically after specified time for prevent the battery loss when the interior light switch is "DOOR" position and the door is open
ON / OFF
I/L ON W/Unlock
ON
Function to light interior light, etc. when the door is unlocked with a transmitter, door key or door lock control switch
ON / OFF
I/L when ACC OFF
ON
Illuminates interior light when power switch is turned from the ON (ACC) to ON (IG) position
ON / OFF

Light control 
Display (Item)
Default
Contents
Setting
Sensitivity
NORMAL
To adjust sensitivity of lighting illumination. Refer to the illustration*1.
LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
Disp Ex ON Sen
NORMAL
Changes brightness when lowering lights such as combination meter indicator light, A/C indicator light, and clock light. Refer to the illustration*2.
LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
Disp Ex OFF Sen
NORMAL
Changes brightness when lowering lights such as combination meter indicator light, A/C indicator light, and clock. Refer to the illustration*3.
LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2
DRL Function (●)
ON
ON / OFF of DRL function
ON / OFF

Illustration of *1 
Brightness of lowering the lights
Dark ←→ Bright
Setting
DARK2 - DARK1 - NORMAL - LIGHT1 - LIGHT2

Illustration of *2 
Brightness when canceling the lowering of the lights
Dark ←→ Bright
Setting
DARK2 - DARK1 - NORMAL - LIGHT1 - LIGHT2

Illustration of *3 
Lighting brightness
Dark ←→ Bright
Setting
DARK2 - DARK1 - NORMAL - LIGHT1 - LIGHT2

WIRELESS DOOR LOCK CONTROL SYSTEM (with Smart Key System)

Wireless door lock control system: 
Display (Items)
Default
Contents
Setting
Open Door Warning (Door ajar warning function
ON
If door is not completely closed and transmitter LOCK switch is pressed, this function sounds buzzer for 10 seconds
ON / OFF
Wireless Buzzer Resp (Buzzer answer-back for wireless door lock operation)
ON
Function that makes wireless buzzer sound for answer-back when transmitter LOCK/UNLOCK switch is pressed
ON / OFF
Panic Function (Panic function)
ON
Function that operates theft deterrent alarm when transmitter PANIC switch transmitter is held 0.8 seconds.
ON / OFF
Unlock 2 Operation (Wireless unlock operated twice)
ON
Function that unlocks driver side door when UNLOCK switch on transmitter is pressed once, and unlocks all doors when pressed twice. If set to OFF, pressing UNLOCK switch once unlocks all doors.
ON / OFF
Auto Lock Time (Auto lock time)
30s
This function controls amount of time from unlocking doors to automatic re-locking function
30s / 60s
Hazard Answer Back (Hazard answer-back for wireless door lock operation)
ON
When LOCK switch on transmitter is pressed, this function illuminates all hazard warning lights once. When UNLOCK switch is pressed, all hazard warning lights illuminate twice
ON / OFF

WIRELESS DOOR LOCK CONTROL SYSTEM (without Smart Key System)

Wireless door lock control system: 
Display (Items)
Default
Contents
Setting
Open Door Warning (Door ajar warning function
ON
If door is not completely closed and transmitter LOCK switch is pressed, this function sounds buzzer for 10 seconds
ON / OFF
Panic Function
ON
Function that operates theft deterrent alarm when transmitter PANIC switch is held 0.8 seconds.
ON / OFF
Unlock 2 Operation (Wireless unlock operated twice)
ON
Function that unlocks driver side door when UNLOCK switch on transmitter is pressed once, and unlocks all doors when pressed twice. If set to OFF, pressing UNLOCK switch once unlocks all doors.
ON / OFF
Auto Lock Time
30s
This function controls amount of time from unlocking doors to automatic re-locking function
30s / 60s
Hazard Answer Back (Hazard answer-back for wireless door lock operation)
ON
When LOCK switch on transmitter is pressed, this function illuminates all hazard warning lights once. When UNLOCK switch is pressed, all hazard warning lights illuminate twice
ON / OFF

SMART KEY SYSTEM

Smart Key System 
Tester Display
Default
Contents
Setting
Door Unlock Mode
(Entry door unlock mode)
EACH
Function that makes entry unlock operation available.
ALL / EACH / D-door
Park Wait Time
(Waiting time to permit door opening of door after locking)
3.0s
Function that sets waiting time to permit opening door after door is locked with entry lock function
0.5s / 1.5s / 2.5s / 5s
Transmit Interval
(Transmission interval)
0.3s
Function that sets entry signal transmission intervals when vehicle is stopped and key is outside vehicle
0.15s / 0.3s / 0.45s / 0.6s
Back Door Opening Operation
(Back door opening operation when vehicle is locked)
LONG
Function that enables back door to open when key is inside luggage room
LONG / TWICE / OFF
Key Taken Warning (w/ P range)
(Warns if key is taken from D-door with P position)
ON
Function that warns driver that key is taken out from driver's door when shift position is P and power switch is not OFF
ON / OFF
Key Taken Warning (w/o P range)
(Warns if key is taken from D-door without P position)
ON
Function that warns driver that key is taken out from driver's door when shift position is not P and power switch is not OFF
ON / OFF
Passenger Take Key
(Warns if key is taken out by other passengers)
ON
Function that warns driver that key is taken out from front passenger's door by passenger when power switch is not OFF
ON / OFF
Lock Door in E/G Idling Buzzer
(Warning time for locking door when engine is idling)
2s
Function that sets warning time for locking doors while engine is idling
OFF / 1s / 2s
Key Left in Vehicle Buzzer
(Warning when key is left in vehicle)
2s
Function that sets warning time for locking doors while key is inside vehicle
OFF / 1s/ 2s
Key Low Battery Warning
(Warning when key battery becomes weak)
ON
Function that warns driver that key's battery power is low
ON / OFF
Key Out Range Warning
(Warning if starting engine when key is out of detection range)
ON
Function that warns driver that entry ignition control is being attempted to be activated while key is out of detection range
ON / OFF
Number of Warning Buzzer Sound
(Sets number of warning buzzer sounds)
3 TIMES
Function that sets number of warning buzzer sounds when key is taken out of vehicle
OFF / 3TIMES / 5TIMES / 7TIMES