Home › Vehicle Exterior › BODY DIMENSIONS › ENGINE COMPARTMENT
BM2070E _01 Vehicle Exterior _061967 BODY DIMENSIONS _0302004 ENGINE COMPARTMENT F

BODY DIMENSIONS  ENGINE COMPARTMENT  THREE-DIMENSIONAL DISTANCE  


HINT:
·

Point F, f and N, n on the vehicle are asymmetrical.

·

In cases in which only one dimension is given, left and right are symmetrical.


·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Front Fender Installation Nut M6 (0.24)
B, b Front Spring Support Installation Hole φ12.5 (0.49)
C, c Hood Hinge Installation Nut M8 (0.31)
D Cowl Top Outer Panel Center Mark -
E, e Front Side Inner Member Standard Hole φ18 (0.71)
F Front Side Inner Member Standard Hole φ16 (0.63)
f Engine Mounting Bracket Installation Nut M12 (0.47)
G, g Radiator Support Installation Nut M6 (0.24)
H, h Front Bumper Reinforcement Installation Nut M10 (0.39)
J,j Radiator Support Standard Hole φ10 (0.39)
K, k Front Fender Extension Standard Hole φ10 (0.39)
L, l Radiator Upper Support Installation Nut M6 (0.24)
M, m Front Fender Installation Nut M6 (0.24)
N, n Radiator Upper Support Standard Hole φ10 (0.39)

K140530E01
0.25,6.51 3.208,6.719 2.958,0.208 10 false Distance between points other than those above 5.021,6.5 7.104,6.708 2.083,0.208 10 false Height from Imaginary Datum Line 0.052,8.51 0.365,8.708 0.313,0.198 10 false mm 0.052,8.656 0.354,8.844 0.302,0.188 10 false (in.)