With the body lower back panel and rear floor upper center crossmember removed.
REMOVAL
| Symbol meaning | |
|---|---|
|
Remove Weld Points |
INSTALLATION
| Symbol meaning | |
|---|---|
|
Plug Weld |
|
Fillet Weld |
Before temporarily installing the new parts, weld the rear floor pan, spare wheel clamp bracket, rear floor pan reinforcement, rear floor crossmember bracket and weld bolts with the standard number of welding points.
After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.