Home › Vehicle Exterior › PAINTING / COATING › BODY PANEL SEALING › from 2019.03
BM2070E _01 Vehicle Exterior _061968 PAINTING / COATING _0302010 BODY PANEL SEALING F

PAINTING / COATING  BODY PANEL SEALING  APPLICATION AREAS  


1.

Be sure to apply body sealer to the body panel joints and door edges (tip of outer panel folded part), etc., to waterproof and rustproof them.

HINT:
·

Apply degreasing agent to a clean cloth and clean the sealer application areas.

·

After removing the applied spot sealer from the sealer application areas using thinner or equivalent, rust-proof the areas by applying primer or equivalent. Then apply body sealer.

·

If sealer is unnecessarily applied to an area, apply degreasing agent to a clean cloth and clean off the sealer immediately.




K110022

Flat Finishing
K110023

No Flat Finishing

K150817

K150818

K150819

K150978E01
1.182,2.908 1.486,3.064 0.303,0.156 10 a - a 3.914,2.908 4.218,3.064 0.303,0.156 10 b - b 6.247,3.09 6.550,3.246 0.303,0.156 10 c - c 0.586,1.897 0.682,2.039 0.096,0.142 10 a 2.844,1.924 2.942,2.075 0.098,0.151 10 b 5.61,2.045 5.702,2.196 0.091,0.151 10 c 0.999,1.981 1.095,2.123 0.096,0.142 10 a 3.251,1.999 3.349,2.150 0.098,0.151 10 b 6.045,2.066 6.136,2.217 0.091,0.151 10 c 0.937,0.319 2.159,0.721 1.222,0.401 12 w/o Glass Roof: 3.347,0.319 4.569,0.721 1.222,0.401 12 w/ Glass Roof: 5.652,0.319 6.874,0.721 1.222,0.401 12 w/ Glass Roof:

K150820

K150821

K101091