Home › General › INTRODUCTION › FEATURES
NM2070E _V1 General _061856 INTRODUCTION _0301391 FEATURES UN GENERAL/CONTROL/DETAILS F

INTRODUCTION  FEATURES  GENERAL/CONTROL/DETAILS  PERFORMANCE  


OUTLINE


a.

TOYOTA Hybrid System-II (THS-II)

i.

This system optimally performs cooperative control of the 2ZR-FXE engine, and Motor Generator No. 1 (MG1) and Motor Generator No. 2 (MG2) in the P410 hybrid vehicle transaxle assembly that provides excellent transmission performance. Furthermore, this system uses a high-output HV battery with a nominal voltage of DC 201.6 V, and a variable-voltage system in which a boost converter boosts the operating voltage of the system to a maximum voltage of DC 650 V.

W108451E05
1.833,3.458 1.833,4.271 true 1.573,2.885 1.219,3.177 1.219,3.177 1.219,4.229 true 3.49,2.698 3.49,4.219 true 1.656,2.469 1.656,1.104 1.656,1.104 1.823,1.104 true 1.854,0.99 2.073,1.188 0.219,0.198 10 false *1 1.146,4.25 1.417,4.458 0.271,0.208 10 false *2 1.76,4.292 2.031,4.5 0.271,0.208 10 false *3 3.406,4.24 3.677,4.448 0.271,0.208 10 false *4

Text in Illustration
*1 2ZR-FXE Engine *2 Inverter with Converter Assembly
*3 P410 Hybrid Vehicle Transaxle Assembly *4 HV Battery Assembly

System Performance
Maximum System Output* kW 100

*: Maximum system output is engine output and MG2 output controlled by THS-II. MG2 output depends on power supplied by the HV battery.



b.

2ZR-FXE Engine

i.

The 2ZR-FXE is an in-line 4-cylinder, 1.8-liter, 16-valve DOHC engine.


ii.

This engine uses a high-expansion ratio Atkinson cycle, Variable Valve Timing-intelligent (VVT-i) system, Electric Throttle Control System-intelligent (ETCS-i) and Exhaust Gas Recirculation (EGR) system employing a highly efficient EGR cooler. In addition, use of an electric engine water pump assembly has eliminated the V-ribbed belt. Thus, improved engine performance, quietness, fuel economy, and cleaner emissions have been achieved.

V101173

Item Specification
No. of Cyls. & Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve, DOHC with VVT-i
Fuel System SFI
Displacement cm3 (cu. in.) 1798 (109.7)
Max. Output kW@rpm 73@5200
Max. Torque N*m@rpm 142@4000



c.

P410 Hybrid Vehicle Transaxle Assembly

i.

The P410 hybrid vehicle transaxle assembly contains Motor Generator No. 1 (MG1) and Motor Generator No. 2 (MG2).

V100289E04
2.667,1.25 1.51,1.25 true 5.5,1.25 4.344,1.25 true 5.542,1.135 5.844,1.385 0.302,0.25 10 false *1 1.323,1.156 1.583,1.406 0.26,0.25 10 false *2

Text in Illustration
*1 Motor Generator No. 1 (MG1) *2 Motor Generator No. 2 (MG2)

Item Specification
Motor Generator No. 1 (MG1) Motor Generator No. 2 (MG2)
Type Permanent Magnet Motor Permanent Magnet Motor
Function Generate, Engine Starter Generate, Drive Wheels
Cooling System Water-cooled Water-cooled
Maximum Output (EEC) kW - 60
Maximum Torque (EEC) N*m - 207



d.

Suspension

i.

A MacPherson strut type independent suspension is used for the front.


ii.

A torsion-beam type suspension is used for the rear.

V101174



e.

Steering

i.

An Electric Power Steering (EPS) system is used.

V101175



f.

Brake

Item Specification
Front Brake Type Ventilated Disc
Rotor Size (D x T)* mm (in.) 296 x 28 (11.65 x 1.10)
Rear Brake Type Solid Disc
Rotor Size (D x T)* mm (in.) 290 x 12 (11.42 x 0.47)
Brake Control System ABS with EBD, Brake Assist, TRA, VSC+, Hill-start Assist Control

*: Diameter x Thickness