Home › Engine / Hybrid System › 2ZR-FXE (INTAKE / EXHAUST) › INTAKE SYSTEM › 2012.03–2013.08
NM2070E _51 Engine / Hybrid System _061863 2ZR-FXE INTAKE / EXHAUST _0301398 INTAKE SYSTEM UN GENERAL/CONTROL/DETAILS F

2ZR-FXE INTAKE / EXHAUST  INTAKE SYSTEM  GENERAL/CONTROL/DETAILS  DETAILS  


CONSTRUCTION


a.

Air Cleaner Assembly

i.

A paper type air cleaner filter element sub-assembly is used.


ii.

An intake air resonator of which the chamber is divided into 3 compartments has been provided to reduce air intake noise, improving the quietness further.

U191455E02
4.25,1.188 4.708,0.271 4.708,0.271 4.906,0.271 true 5.115,2.479 5.573,1.563 5.573,1.563 5.781,1.563 true 2.385,2.792 1.958,1.865 1.958,1.865 1.771,1.865 true 4.927,4.042 5.385,3.125 5.385,3.125 5.583,3.125 true 2.719,1.573 2.281,0.646 2.281,0.646 2.094,0.646 true 4.958,0.188 5.219,0.365 0.26,0.177 10 false *1 5.844,1.469 6.104,1.646 0.26,0.177 10 false *2 1.594,1.781 1.854,1.958 0.26,0.177 10 false *3 5.635,3.031 5.896,3.208 0.26,0.177 10 false *4 1.927,0.552 2.188,0.729 0.26,0.177 10 false *5

Text in Illustration
*1 Air Cleaner Cap Sub-assembly *2 Air Cleaner Filter Element Sub-assembly
*3 Inlet Air Cleaner
- Intake Air Resonator
*4 Air Cleaner Case Sub-assembly
*5 Air Cleaner Hose - -



b.

Throttle Body Assembly

i.

A linkless type throttle body assembly in which the throttle position sensor and the throttle control motor are integrated is used. It realizes excellent throttle valve control.


ii.

The throttle control motor is a DC motor with excellent response and minimal power consumption. The ECM performs duty ratio control of the direction and the amperage of the current that flows to the throttle control motor in order to regulate the throttle valve angle.

W101512E11
3.542,0.917 2.927,0.323 2.927,0.323 2.802,0.323 true 4.677,1.885 5.323,1.052 5.323,1.052 5.427,1.052 true 4.125,2.333 4.563,3.354 4.563,3.354 4.688,3.354 true 2.385,2.813 2.01,3.438 2.01,3.438 1.906,3.438 true 2.615,0.229 2.813,0.427 0.198,0.198 10 false *1 1.719,3.344 1.917,3.542 0.198,0.198 10 false *2 5.479,0.948 5.677,1.146 0.198,0.198 10 false *3 4.74,3.26 4.938,3.479 0.198,0.219 10 false *4

Text in Illustration
*1 Throttle Control Motor *2 Throttle Position Sensor
*3 Throttle Valve *4 Return Spring



c.

Intake Manifold

i.

The intake manifold is made of plastic to reduce the weight and the amount of heat transferred from the cylinder head sub-assembly. As a result, the intake air temperature is reduced and the volumetric efficiency is improved.


ii.

An EGR chamber is built into the intake manifold in order to uniformly distribute EGR gases to the cylinders.

W101563E04
5.229,1.219 6.292,2.458 6.292,2.458 6.385,2.458 true 2.906,1.875 3.667,0.833 3.667,0.833 3.771,0.833 true 2.271,2.469 3.052,3.042 3.052,3.042 3.146,3.042 true 1.219,3.083 1.885,3.479 1.885,3.479 1.979,3.479 true 2.073,1.208 2.781,0.333 2.781,0.333 2.906,0.333 true 2.938,0.219 3.156,0.427 0.219,0.208 10 false *1 3.813,0.729 4.031,0.938 0.219,0.208 10 false *2 3.177,2.948 3.396,3.156 0.219,0.208 10 false *3 2.01,3.375 2.229,3.583 0.219,0.208 10 false *4 6.417,2.365 6.635,2.573 0.219,0.208 10 false *5

Text in Illustration
*1 Intake Manifold *2 EGR Port
*3 PCV Port *4 Purge Port
*5 EGR Chamber - -