Home › Drivetrain › P410 (HYBRID TRANSMISSION / TRANSAXLE) › HYBRID TRANSAXLE SYSTEM
NM2070E _52 Drivetrain _061867 P410 HYBRID TRANSMISSION / TRANSAXLE _0301405 HYBRID TRANSAXLE SYSTEM UN GENERAL/CONTROL/DETAILS F

P410 HYBRID TRANSMISSION / TRANSAXLE  HYBRID TRANSAXLE SYSTEM  GENERAL/CONTROL/DETAILS  DETAILS  


CONSTRUCTION


a.

Hybrid Vehicle Transaxle Assembly

i.

This hybrid vehicle transaxle assembly consists primarily of MG1, MG2, a compound gear unit, a transmission input damper assembly, a counter gear, a final gear, a differential gear unit and an oil pump.


ii.

This hybrid vehicle transaxle assembly has a 3-shaft configuration. The compound gear unit, a transmission input damper assembly, an oil pump, MG1 and MG2 are provided on the input shaft. The counter driven gear and the final drive gear are provided on the second shaft. The final driven gear and the differential gear unit are provided on the third shaft.


iii.

The engine, MG1 and MG2 are mechanically joined via the compound gear unit.

U111619E04
2.052,2.448 1.594,2.448 true 3.76,3.344 1.594,3.344 true 3.521,3.74 1.594,3.74 true 5.49,1.281 4.698,1.281 true 3.781,3.49 5.5,3.49 true 4.135,4.177 5.5,4.177 true 4.292,1.146 4.292,0.375 4.292,0.375 4.5,0.375 true 3.573,1.302 3.573,0.375 3.573,0.375 3.792,0.375 true 2.771,1.292 2.771,0.365 2.771,0.365 2.979,0.365 true 3.01,0.26 3.229,0.469 0.219,0.208 10 false *2 1.417,2.344 1.635,2.552 0.219,0.208 10 false *9 1.417,3.229 1.635,3.438 0.219,0.208 10 false *6 1.417,3.656 1.635,3.865 0.219,0.208 10 false *5 3.813,0.26 4.031,0.469 0.219,0.208 10 false *3 4.531,0.271 4.75,0.479 0.219,0.208 10 false *1 5.552,1.167 5.771,1.375 0.219,0.208 10 false *4 5.552,3.385 5.771,3.594 0.219,0.208 10 false *7 5.552,4.083 5.771,4.292 0.219,0.208 10 false *8

Text in Illustration
*1 MG1 *2 MG2
*3 Compound Gear Unit *4 Transmission Input Damper Assembly
*5 Counter Driven Gear *6 Final Drive Gear
*7 Final Driven Gear *8 Differential Gear Unit
*9 Oil Pump - -



b.

Compound Gear Unit

i.

The compound gear unit consists of the power split planetary gear unit and the motor speed reduction planetary gear unit. Each planetary ring gear is integrated with the compound gear. Furthermore, this compound gear is integrated with a counter drive gear and parking gear.


ii.

The power split planetary gear unit splits the motive force of the engine two ways: one to drive the wheels, and the other to drive MG1, so that MG1 can function as a generator.


iii.

The motor speed reduction planetary gear unit, whose purpose is to reduce MG2 speed, is used to enable the high-speed, high-output MG2 to adapt optimally to the compound gear.

X105765E03
4.635,1.781 4.635,2.25 true 5.563,1.448 5.885,0.969 5.885,0.969 6.083,0.969 true 6.198,2.063 6.51,1.573 6.51,1.573 6.719,1.573 true 3.771,0.813 4.063,1.01 0.292,0.198 10 false *1 4.563,2.271 4.854,2.469 0.292,0.198 10 false *2 6.115,0.865 6.406,1.063 0.292,0.198 10 false *3 6.74,1.458 6.938,1.656 0.198,0.198 10 false *4

Text in Illustration
*1 Compound Gear Unit *2 Power Split Planetary Gear Unit
*3 Counter Drive Gear (Compound Gear) *4 Motor Speed Reduction Planetary Gear Unit


iv.

The connection of the sun gear, ring gear and carrier of each planetary gear unit is as shown below.

Item Connection
Power Split Planetary Gear Unit Sun Gear MG1
Ring Gear Compound Gear (To Wheels)
Carrier Input Shaft (From Engine)
Motor Speed Reduction Planetary Gear Unit Sun Gear MG2
Ring Gear Compound Gear (To Wheels)
Carrier Fixed

U111624E11
5.667,1.51 5.667,0.635 5.667,0.635 5.917,0.635 true 4.927,1.708 4.927,0.844 4.927,0.844 5.177,0.844 true 1.135,1.042 1.271,1.042 1.271,1.042 1.51,1.396 true 4.49,3.292 4.271,3.292 4.271,3.292 4.271,2.969 true 3.781,2.24 3.271,3.313 3.271,3.313 3.021,3.313 true 3.25,2.083 2.771,2.813 2.771,2.813 2.521,2.813 true 4.781,2.281 5.26,3.094 5.26,3.094 5.448,3.094 true 3.844,1.063 3.844,0.292 3.844,0.292 4.031,0.292 true 3.521,2.323 3.021,3.063 3.021,3.063 2.74,3.063 true 4.427,2.313 4.646,3.104 4.646,3.104 4.854,3.104 true 3.271,0.458 3.531,0.74 0.26,0.281 10 false *3 4.052,0.177 4.313,0.458 0.26,0.281 10 false *5 4.219,0.458 4.479,0.74 0.26,0.281 10 false *4 5.958,0.531 6.219,0.813 0.26,0.281 10 false *2 5.198,0.729 5.458,1.01 0.26,0.281 10 false *6 0.948,0.948 1.208,1.229 0.26,0.281 10 false *1 4.531,3.188 4.792,3.469 0.26,0.281 10 false *9 4.885,2.99 5.146,3.271 0.26,0.281 10 false *7 2.823,3.24 3.083,3.521 0.26,0.281 10 false *8 2.333,2.719 2.594,3 0.26,0.281 10 false *6 2.552,2.969 2.813,3.25 0.26,0.281 10 false *7 5.479,2.99 5.74,3.271 0.26,0.281 10 false *8

Text in Illustration
*1 MG1 *2 MG2
*3 Power Split Planetary Gear Unit *4 Motor Speed Reduction Planetary Gear Unit
*5 Counter Drive Gear *6 Sun Gear
*7 Ring Gear *8 Carrier
*9 Counter Driven Gear - -



c.

Transmission Input Damper Assembly

i.

A transmission input damper assembly that consists of a coil spring with low-twist characteristics is used in order to absorb the torque fluctuation in the motive force of the engine. The torque limiter uses a dry-type, single-plate friction material. Through the use of these parts, a damper construction that excels in absorbing the vibrations of the engine motive force has been achieved.

X108190E02
4.063,0.177 7.052,3.583 2.99,3.406 4.354,1.146 5.01,1.146 true 4.344,1.896 4.875,1.896 true 3.75,2 2.563,2 true 4.167,0.26 4.396,0.458 0.229,0.198 10 false *a 4.188,1.052 4.417,1.25 0.229,0.198 10 false *1 4.188,1.802 4.417,2 0.229,0.198 10 false *2 3.771,1.896 4,2.094 0.229,0.198 10 false *2

Text in Illustration
*1 Torque Limiter *2 Coil Spring
*a A-A Cross Section - -
V100135

from Engine - -



d.

Oil Pump Mechanism

i.

The oil pump consists of the oil pump drive shaft, oil pump drive rotor, oil pump driven rotor and oil pump cover. The pump is driven by the engine via the input shaft and lubricates the gears.

X109140E02
3.573,2.177 3.865,1.823 3.865,1.823 3.969,1.823 true 4.313,2.542 4.604,2.198 4.604,2.198 4.708,2.198 true 4.583,2.677 4.865,2.323 4.865,2.323 4.979,2.323 true 5.115,2.823 5.396,2.479 5.396,2.479 5.5,2.479 true 4.01,1.708 4.219,1.885 0.208,0.177 10 false *1 4.75,2.073 4.958,2.25 0.208,0.177 10 false *2 5.021,2.208 5.229,2.385 0.208,0.177 10 false *3 5.542,2.375 5.75,2.552 0.208,0.177 10 false *4

Text in Illustration
*1 Oil Pump Drive Shaft *2 Oil Pump Drive Rotor
*3 Oil Pump Driven Rotor *4 Oil Pump Cover



e.

Oil Sling Type Lubrication Mechanism

i.

This sling type lubrication mechanism uses the oil catch tanks and final driven gear, which sling the lubricant into the oil catch tanks. This construction minimizes the drive torque of the oil pump, which reduces the drive loss.


ii.

Oil catch tanks are used in order to supply oil in a stable manner. The oil catch tanks temporarily store the oil that is slung up, and supply oil to the gears from there. Furthermore, oil holes are provided in the oil catch tanks in order to efficiently supply oil to MG1 and MG2.

X101720E10
2.771,1 1.458,1 true 3.24,1.833 1.458,1.833 true 4.396,1.448 5.844,1.448 true 4.573,2.448 5.844,2.448 true 4.792,2.948 5.844,2.948 true 2.479,1.385 1.469,1.385 true 3.615,0.927 3.615,0.302 3.615,0.302 3.792,0.302 true 4.74,1.156 5.833,1.156 true 2.938,2.271 1.469,2.271 true 5.208,2.26 5.75,1.854 5.75,1.854 5.844,1.854 true 3.813,0.198 4,0.385 0.188,0.188 10 false *3 5.885,1.344 6.073,1.531 0.188,0.188 10 false *4 5.885,2.344 6.073,2.531 0.188,0.188 10 false *6 5.885,2.844 6.073,3.031 0.188,0.188 10 false *7 1.292,0.875 1.479,1.063 0.188,0.188 10 false *2 1.292,1.271 1.479,1.458 0.188,0.188 10 false *3 1.292,1.708 1.479,1.896 0.188,0.188 10 false *1 5.885,1.042 6.073,1.229 0.188,0.188 10 false *8 1.292,2.167 1.479,2.354 0.188,0.188 10 false *9 5.896,1.75 6.083,1.938 0.188,0.188 10 false *5

Text in Illustration
*1 Input Shaft *2 Oil Hole
*3 Oil Catch Tank *4 Second Shaft
*5 Final Gear Rotation Direction *6 Third Shaft
*7 Final Driven Gear *8 Counter Driven Gear
*9 Counter Drive Gear - -
V100135

Oil Flow - -




OPERATION


a.

Motive Force Transmission Path

i.

The motive force created by the engine and MG2 is transmitted by the counter drive gear of the compound gear unit, the counter driven gear, the final drive gear, and then the differential gear unit, in order to drive the front wheels.

U111625E07
2.958,1.229 2.958,0.333 2.958,0.333 3.135,0.333 true 1.906,1.24 1.906,0.344 1.906,0.344 2.083,0.344 true 4.24,0.323 4.115,0.323 4.115,0.323 4.115,0.76 false 5.469,1.219 5.469,0.333 5.469,0.333 5.656,0.333 true 6.125,1.292 6.125,0.333 6.125,0.333 6.302,0.333 true 3.625,3.021 2.885,3.021 true 5.198,3.083 4.5,3.083 true 4.583,3.844 3.969,3.844 true 3.021,3.677 3.021,4.354 3.021,4.354 3.198,4.354 true 4.365,2.146 5.01,2.865 5.01,2.865 5.198,2.865 true 0.76,1.042 0.76,0.333 0.76,0.333 0.938,0.333 true 3.729,1.76 3.115,2.354 3.115,2.354 2.896,2.354 true 4.125,1.885 3.115,2.802 3.115,2.802 2.885,2.802 true 4.969,1.479 4.969,0.333 4.969,0.333 5.167,0.333 true 4.854,1.979 5,2.344 5,2.344 5.188,2.344 true 3.76,1.958 3.115,2.552 3.115,2.552 2.896,2.552 true 4.615,1.948 5.01,2.594 5.01,2.594 5.198,2.594 true 3.167,0.229 3.385,0.458 0.219,0.229 10 false *3 4.271,0.219 4.49,0.448 0.219,0.229 10 false *4 5.688,0.229 5.906,0.458 0.219,0.229 10 false *6 5.198,0.229 5.417,0.458 0.219,0.229 10 false *5 6.344,0.229 6.563,0.458 0.219,0.229 10 false *7 5.24,2.771 5.5,3 0.26,0.229 10 false *10 5.229,2.229 5.448,2.458 0.219,0.229 10 false *9 5.24,2.479 5.458,2.708 0.219,0.229 10 false *8 2.719,2.698 2.938,2.927 0.219,0.229 10 false *9 2.719,2.24 2.938,2.469 0.219,0.229 10 false *5 2.719,2.458 2.938,2.688 0.219,0.229 10 false *8 5.24,2.99 5.521,3.219 0.281,0.229 10 false *12 4.615,3.74 4.865,3.969 0.25,0.229 10 false *13 3.219,4.26 3.5,4.49 0.281,0.229 10 false *14 2.667,2.917 2.906,3.146 0.24,0.229 10 false *11 2.115,0.219 2.333,0.448 0.219,0.229 10 false *2 0.969,0.208 1.188,0.438 0.219,0.229 10 false *1

Text in Illustration
*1 Engine *2 Transmission Input Damper Assembly
*3 MG1 *4 Compound Gear Unit
*5 Sun Gear *6 MG2
*7 Oil Pump *8 Ring Gear
*9 Carrier *10 Counter Drive Gear (Compound Gear)
*11 Final Drive Gear *12 Counter Driven Gear
*13 Final Driven Gear *14 Differential Gear Unit



b.

Engine Motive Force and MG2 Motive Force Transmission Path

i.

The engine motive force, which is input by the carrier, is transmitted to the ring gear. The motive force of MG2 is transmitted to the ring gear via the motor speed reduction planetary gear unit. The sum of these two motive forces is transmitted by the compound gear in order to drive the wheels.

U111627E04
2.167,1.01 2.167,0.333 2.167,0.333 2.333,0.333 true 5.958,1.01 5.958,0.333 5.958,0.333 6.125,0.333 true 3.615,0.156 3.875,0.438 0.26,0.281 10 false *3 4.458,0.156 4.719,0.438 0.26,0.281 10 false *4 6.177,0.24 6.438,0.521 0.26,0.281 10 false *2 2.365,0.24 2.625,0.521 0.26,0.281 10 false *1

Text in Illustration
*1 MG1 *2 MG2
*3 Power Split Planetary Gear Unit *4 Motor Speed Reduction Planetary Gear Unit
V100135

Rotation Direction
V100136

From Engine
V100137

From MG2
V100138

To Wheels



c.

MG2 Motive Force Transmission Path

i.

The motive force of MG2 is transmitted via the sun gear and is output to the ring gear in order to drive the wheels. The carrier of the motor speed reduction planetary gear unit is fixed. As a result, the motor speed reduction planetary gear unit reduces the speed of MG2, increasing torque in accordance with a set gear ratio. The direction of rotation of MG2 changes according to whether the vehicle is traveling forward or in reverse.

U111628E04
1.906,1.01 1.906,0.333 1.906,0.333 2.073,0.333 true 5.583,1.01 5.583,0.333 5.583,0.333 5.76,0.333 true 2.125,0.229 2.385,0.51 0.26,0.281 10 false *1 3.354,0.125 3.615,0.406 0.26,0.281 10 false *3 4.198,0.125 4.458,0.406 0.26,0.281 10 false *4 5.813,0.229 6.073,0.51 0.26,0.281 10 false *2

Text in Illustration (Driving Forward:)
*1 MG1 *2 MG2
*3 Power Split Planetary Gear Unit *4 Motor Speed Reduction Planetary Gear Unit
V100135

Rotation Direction
V100136

From MG2
V100137

To Wheel - -

U111629E04
1.958,1 1.958,0.25 1.958,0.25 2.125,0.25 true 5.635,1 5.635,0.25 5.635,0.25 5.802,0.25 true 3.406,0.156 3.667,0.438 0.26,0.281 10 false *3 4.25,0.156 4.51,0.438 0.26,0.281 10 false *4 2.177,0.156 2.438,0.438 0.26,0.281 10 false *1 5.865,0.156 6.125,0.438 0.26,0.281 10 false *2

Text in Illustration (Driving in Reverse:)
*1 MG1 *2 MG2
*3 Power Split Planetary Gear Unit *4 Motor Speed Reduction Planetary Gear Unit
V100135

Rotation Direction
V100136

From MG2
V100137

To Wheel - -



d.

Engine Motive Force Transmission Path

i.

The engine motive force, which is input by the carrier, is transmitted to the sun gear. Thus, motive force is transmitted in order to operate MG1 as a generator.

U111630E04
2.146,1 2.146,0.271 2.146,0.271 2.323,0.271 true 5.833,1 5.833,0.271 5.833,0.271 6,0.271 true 3.594,0.156 3.854,0.438 0.26,0.281 10 false *3 4.438,0.167 4.698,0.448 0.26,0.281 10 false *4 2.375,0.177 2.635,0.458 0.26,0.281 10 false *1 6.052,0.177 6.313,0.458 0.26,0.281 10 false *2

Text in Illustration
*1 MG1 *2 MG2
*3 Power Split Planetary Gear Unit *4 Motor Speed Reduction Planetary Gear Unit
V100135

Rotation Direction
V100136

From Engine
V100137

To MG1 - -



e.

MG1 Motive Force Transmission Path

i.

The motive force of MG1 is transmitted via the sun gear and is output to the carrier. Thus, motive force is transmitted in order to start the engine.

U111631E04
2.146,0.938 2.146,0.208 2.146,0.208 2.323,0.208 true 5.833,0.938 5.833,0.208 5.833,0.208 6,0.208 true 3.594,0.104 3.854,0.385 0.26,0.281 10 false *3 4.438,0.104 4.698,0.385 0.26,0.281 10 false *4 2.375,0.104 2.635,0.385 0.26,0.281 10 false *1 6.052,0.104 6.313,0.385 0.26,0.281 10 false *2

Text in Illustration
*1 MG1 *2 MG2
*3 Power Split Planetary Gear Unit *4 Motor Speed Reduction Planetary Gear Unit
V100135

Rotation Direction
V100136

From MG1
V100137

To Engine - -