Home › Drivetrain › AXLE AND DIFFERENTIAL › AXLE SYSTEM
NM2070E _52 Drivetrain _061869 AXLE AND DIFFERENTIAL _0301408 AXLE SYSTEM UN GENERAL/CONTROL/DETAILS F

AXLE AND DIFFERENTIAL  AXLE SYSTEM  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

Front Axle

i.

Compact and highly rigid double-row angular ball bearings are used on the front axle. The double-row angular ball bearings and the axle hub are integrated to ensure high rigidity, thus realizing excellent driving stability and braking stability.


ii.

Due to an active type speed sensor being adopted, a sensor rotor is provided on the hub bearing inner race.

X105763E02
3.552,1.323 4.219,0.365 4.219,0.365 4.385,0.365 true 4.083,2.292 4.75,1.323 4.75,1.323 4.917,1.323 true 4.281,2.281 4.938,1.625 4.938,1.625 5.104,1.625 true 4.406,2.74 5.146,3.063 5.146,3.063 5.333,3.063 true 4,2.833 4.906,3.75 4.906,3.75 5.135,3.75 true 4.417,0.26 4.635,0.448 0.219,0.188 10 false *1 4.948,1.219 5.167,1.406 0.219,0.188 10 false *2 5.135,1.521 5.354,1.708 0.219,0.188 10 false *2 5.365,2.958 5.583,3.146 0.219,0.188 10 false *3 5.167,3.656 5.385,3.844 0.219,0.188 10 false *4

Text in Illustration
*1 Steering Knuckle *2 Double-row Angular Ball Bearing
*3 Front Axle Hub Sub-assembly *4 Sensor Rotor

NOTICE:
·

Do not place magnetized objects close to the surface of the sensor rotor.

·

Do not allow any iron particles, iron sand, dust, debris, or oil to come in contact with the surface of the sensor rotor.





b.

Rear Axle

i.

Compact and highly rigid double-row angular ball bearings are used on the rear axle. The double-row angular ball bearings and the axle hub are integrated to ensure high rigidity, thus realizing excellent driving stability and braking stability.


ii.

Due to an active type speed sensor being adopted, a sensor rotor is provided on the hub bearing inner race.

X105764E02
3.208,2.115 2.573,1.74 2.573,1.74 2.49,1.74 true 3.542,2.115 2.625,1.25 2.625,1.25 2.5,1.25 true 3.76,2.583 4.385,3.156 4.385,3.156 4.479,3.156 true 2.99,2.708 2.375,3.313 2.375,3.313 2.292,3.313 true 2.323,1.646 2.531,1.844 0.208,0.198 10 false *1 2.323,1.156 2.531,1.354 0.208,0.198 10 false *1 4.51,3.052 4.719,3.25 0.208,0.198 10 false *2 2.125,3.229 2.333,3.427 0.208,0.198 10 false *3

Text in Illustration
*1 Double-row Angular Ball Bearing *2 Rear Axle Hub and Bearing Assembly
*3 Sensor Rotor - -

NOTICE:
·

Do not place magnetized objects close to the surface of the sensor rotor.

·

Do not allow any iron particles, iron sand, dust, debris, or oil to come in contact with the surface of the sensor rotor.