Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › MONITOR SYSTEM › 2016.05–2020.08
NM2070E _56 Audio / Visual / Telematics _061883 PARK ASSIST / MONITORING _0301423 MONITOR SYSTEM UN GENERAL/CONTROL/DETAILS F

PARK ASSIST / MONITORING  MONITOR SYSTEM  GENERAL/CONTROL/DETAILS  DETAILS  


FUNCTION OF MAIN COMPONENTS


a.

The main components in the monitor system have the following functions:

Component Function
Rear Television Camera Assembly Captures images of the area behind the vehicle and outputs video signals to the radio and display receiver assembly.
Radio and Display Receiver Assembly Displays the image of the area behind the vehicle from the rear television camera assembly.
Hybrid Vehicle Control ECU Sends a reverse signal to the No. 1 integration relay.
No. 1 Integration Relay Sends the reverse signal from the hybrid vehicle control ECU to the radio and display receiver assembly.



OPERATING CONDITION


a.

This system operates when all the conditions given below have been met:

·

Power switch is on (IG).

·

Reverse (R) is selected.




FUNCTION


a.

Area Displayed on Screen

i.

Objects on the right of the vehicle appear on the right side of the display panel, and objects on the left of the vehicle appear on the left side of the display panel.


ii.

The rear television camera uses a wide-angle lens. The perceived distance from images that appear on the screen differs from the actual distance.

Y174554

NOTICE:

The area displayed on the screen may vary according to vehicle status or road conditions. The area covered by the rear television camera assembly is limited. The rear television camera assembly does not show objects close to either corner of the bumper or show the area under the bumper.




b.

Warning Message

i.

A warning message appears at the bottom of the screen under the following conditions. The warning message appears in the same language that has been selected by the language selector of the multi-display.

Message Appearing at Bottom of Screen
Warning Message Outline
Check surroundings for safety. This message always appears during system operation.




CONSTRUCTION


a.

Rear Television Camera Assembly

i.

The rear television camera assembly consists of a wide-angle lens and a Complementary Metal Oxide Semiconductor (CMOS).

Y172644E02
2.542,1.375 2.406,1.635 2.406,1.635 2.125,1.635 true 4.365,1.396 4.24,1.646 4.24,1.646 3.948,1.646 true 1.938,1.521 2.167,1.708 0.229,0.188 10 false *a 3.781,1.542 4.01,1.729 0.229,0.188 10 false *a

Text in Illustration
*a Wide-angle Lens - -



b.

Multi-display (Rear View Monitor Display)

i.

In rear view monitor mode, the image of the area behind the vehicle captured by the rear television camera assembly is displayed on the radio and display receiver assembly.

Y170793E04
3.604,1.344 3.958,0.344 3.958,0.344 4.156,0.344 true 1.906,1.146 2.885,1.146 true 2.313,2.406 2.448,2.406 2.448,2.406 2.865,1.385 true 4.26,1.125 5.24,1.125 true 3.594,2.198 3.594,2.5 true 4.573,1.604 4.573,2.469 true 4.51,2.5 4.76,2.75 0.25,0.25 10 false (1) 2.115,2.292 2.365,2.542 0.25,0.25 10 false (2) 4.208,0.229 4.458,0.479 0.25,0.25 10 false (3) 1.708,1.021 1.958,1.271 0.25,0.25 10 false (4) 3.521,2.521 3.771,2.771 0.25,0.25 10 false (5) 5.292,1.021 5.542,1.271 0.25,0.25 10 false (4)

Item Description
(1) Distance Guide Line (Red) Indicates a position on the ground about 0.5 m (1.5 ft.) behind the rear bumper.
(2) Distance Guide Line (Blue) Indicates a position on the ground about 1.0 m (3.0 ft.) behind the rear bumper.
(3) Vehicle Center Guide Line (Blue) Indicates the estimated position on the ground of the center of the vehicle.
(4) Vehicle Width Guide Lines (Blue) Indicate the estimated vehicle width.
(5) Warning Message Display Area Area where a warning message is displayed.




FAIL-SAFE


a.

The table below indicates malfunction detection items for the rear view monitor system.

Malfunctioning Parts Detection Item Function
Rear Television Camera Assembly Transmission of rear television camera assembly malfunction signal Stops signal reception and displays a dark screen



DIAGNOSIS


a.

The radio and display receiver assembly is equipped with a diagnosis function which can display a diagnosis menu for the rear view monitor system. For details, refer to the Repair Manual.