Home › Vehicle Interior › LIGHTING (INT) › LIGHTING SYSTEM › 2012.03–2014.11
NM2070E _58 Vehicle Interior _061887 LIGHTING (INT) _0301431 LIGHTING SYSTEM UN GENERAL/CONTROL/DETAILS F

LIGHTING (INT)  LIGHTING SYSTEM  GENERAL/CONTROL/DETAILS  DETAILS  


FUNCTION


a.

The illuminated entry system has the following functions:

Function Outline Lights that Operate
Actuation Area-linked
·

When a registered key enters any actuation area around the doors, the lights that operate turn on.

·

When a registered key leaves all of the actuation areas around the doors, the lights that operate turn off.


·

Power Switch Illumination

·

Map Light Assembly

·

No. 1 Room Light Assembly


Door Lock/Unlock-linked
·

When any door is unlocked, the lights that operate turn on.

·

When all doors are locked, the lights that operate turn off.


·

Power Switch Illumination

·

Map Light Assembly

·

No. 1 Room Light Assembly

·

Footwell Lights (No. 1 Interior Illumination Light Assembly LH, RH)


Door Open/Close-linked
·

When any door is opened, the lights that operate turn on.

·

When all doors are closed, the lights that operate turn off.


·

Power Switch Illumination

·

Map Light Assembly

·

No. 1 Room Light Assembly

·

Footwell Lights (No. 1 Interior Illumination Light Assembly LH, RH)


Power Switch-linked
·

When the power switch is changed from on (ACC) or on (IG) to off, the lights that operate turn on.

·

When the power switch is changed from off to on (ACC) or on (IG), the lights that operate turn off.


·

Power Switch Illumination

·

Map Light Assembly

·

No. 1 Room Light Assembly


When the power switch is changed from off to on (IG), the lights that operate turn on. Footwell Lights (No. 1 Interior Illumination Light Assembly LH, RH)
Shift Position-linked When the power switch is on (IG) and the shift position is moved out of P, the lights that operate dim. Footwell Lights (No. 1 Interior Illumination Light Assembly LH, RH)
Delay When approximately 15 seconds elapse after any of the following conditions is met, the lights that operate turn off:
·

An actuation area-linked function is used.

·

The door unlock-linked function is active.

·

Any door is opened and then all doors are closed when the power switch is off.


·

Power Switch Illumination

·

Map Light Assembly

·

No. 1 Room Light Assembly


When approximately 15 seconds elapse after any of the following conditions is met, the lights that operate turn off:
·

The door unlock-linked function is active.

·

Any door is opened and then all doors are closed when the power switch is off.


Footwell Lights (No. 1 Interior Illumination Light Assembly LH, RH)
Battery Saving When no changes occur in the condition of the doors for 20 minutes and a key is not in the actuation area, these lights turn off.
·

Power Switch Illumination

·

Map Light Assembly

·

No. 1 Room Light Assembly


When no changes occur in the condition of the doors for 20 minutes, the lights that operate turn off. Footwell Lights (No. 1 Interior Illumination Light Assembly LH, RH)