Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM › 2012.03–2016.05
NM2070E _58 Vehicle Interior _061892 HEATING / AIR CONDITIONING _0301438 AIR CONDITIONING SYSTEM UN GENERAL/CONTROL/DETAILS F

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

The air conditioning system main components have been made compact, lightweight, and highly efficient to realize a combination of ensuring comfort and enhancing actual fuel consumption.


b.

HFO1234yf refrigerant is used on models for Europe.

i.

Global Warming Potential (GWP) has been significantly reduced by using HFO1234yf refrigerant, thus contributing to global warming prevention.




SPECIFICATION


a.

Performance

Heater Heater Output W 5200
Air Flow Volume m3/h 330
Power Consumption W 205
Cooler Cooling Capacity W 4630*1
4920*2
Air Flow Volume m3/h 475
Power Consumption W 250

*1: Models for Europe

*2: Models for Australia and destination package for Hong Kong and New Zealand



b.

Ventilation and Heater Radiator Unit Sub-assembly

Heater Radiator Unit Sub-assembly Type Straight Flow Aluminum (SFA)-II
Size
W x H x L
mm (in.) 201.5 x 150 x 27
(7.9 x 5.9 x 1.1)
Fin Pitch mm (in.) 1.8 (0.07)
Blower with Fan Motor Sub-assembly Motor Type K70-10.5T
Fan Type Semi Sirocco
Fan Size (Dia. x H) mm (in.) 155 x 65 (6.1 x 2.6)


c.

Air Conditioning

Condenser with Receiver Assembly Type Multi-flow IV
(Sub Cool)
Size
W x H x L
mm (in.) 636 x 280.6 x 22
(25 x 11.0 x 0.9)
Fin Pitch mm (in.) 2.7 (0.11)
Cooler Evaporator Sub-assembly No. 1 Type Revolutionary Super-slim Structure (RS)*1
Ejector Cycle System (ECS)*2
Size
W x H x L
mm (in.) 226.1 x 241 x 38
(8.9 x 9.5 x 1.5)
Fin Pitch mm (in.) 3.0 (0.12)
Compressor with Motor Assembly Type ES27
Compressor Oil Type ND11
Refrigerant Type HFO1234yf*1
HFC 134a*2
Charge Volume g (oz) 440 to 500 (15.6 to 17.6)
Clean Air Filter Pollen Removal Type

*1: Models for Europe

*2: Models for Australia and destination package for Hong Kong and New Zealand




MAIN FEATURES


a.

The air conditioning system has the following features:

High Performance
·

Neural network control is used so passengers can control the air conditioning accurately for maximum comfort.

·

A pollen removal type clean air filter is used as the clean air filter (air refiner element).

·

Micro dust pollen filter mode control is used to remove pollen in the area around the upper part of the bodies of the driver and front passenger.

·

The blower control has 7 levels in manual mode and 31 levels in AUTO mode for more precise control.

·

The ejector cycle system is used in the refrigerant cycle, increasing energy consumption efficiency and cooling performance.

·

The Positive Temperature Coefficient (PTC) heater system is used. This system contains a PTC heater (quick heater assembly) that heats the air that has passed through the heater radiator unit sub-assembly to ensure proper heater performance.*1


Lightweight A bus connector with a built-in IC is used in a lightweight wire harness design with a reduced number of wires. The use of this connector means that pulse pattern type servo motors are used.
Compact
·

A semi-center location air conditioning radiator assembly is used, in which the cooler evaporator sub-assembly No. 1 and heater radiator unit sub-assembly are mounted horizontally.

·

A blower motor with a built-in blower motor controller is used in a compact construction.

·

An ejector is placed in the cooler evaporator sub-assembly No. 1, thus allowing the ejector cycle to operate in a space equivalent to that of a conventional evaporator.


Others

The following parts are used to ensure high performance while realizing a compact and lightweight construction.

-

ES27 type compressor with motor assembly

-

Revolutionary Super-slim Structure (RS) type cooler evaporator sub-assembly No. 1*2

-

Ejector Cycle System (ECS) type cooler evaporator sub-assembly*3

-

Straight Flow Aluminum (SFA)-II type heater radiator unit sub-assembly

-

Multi-flow (MF)-IV type condenser with receiver assembly




*1: Modes with PTC heater system

*2: Models for Europe

*3: Models for Australia and destination package for Hong Kong and New Zealand