Home › Engine / Hybrid System › CRUISE CONTROL › ROAD SIGN ASSIST SYSTEM › 2017.12–2020.08
NM2070E _51 Engine / Hybrid System _061866 CRUISE CONTROL _0338835 ROAD SIGN ASSIST SYSTEM UN GENERAL/CONTROL/DETAILS F

CRUISE CONTROL  ROAD SIGN ASSIST SYSTEM  GENERAL/CONTROL/DETAILS  DETAILS  


FUNCTION OF MAIN COMPONENTS


a.

The main components in the RSA have the following functions.

Item Function

*: The threshold can be adjusted to 1 of 3 levels through the customization function

Forward Recognition Camera
·

Captures road signs.

·

Performs RSA system control based on information of road signs captured by the monocular camera.


Camera Heater (Forward Recognition Hood with Heater Sub-assembly) The camera heater is heated according to signals from the forward recognition camera.
Millimeter Wave Radar Sensor Assembly detects object information and sends signal to forward recognition camera.
Combination Meter Sub-assembly Multi-information Display
·

Displays road signs recognized by the forward recognition camera.

·

The RSA system can be turned on and off through the settings tab.


Buzzer Sounds for speed limit exceeded and no overtaking notifications.*
Steering Pad Switch Assembly Meter Control Switch Sends a multi-information operating signal to the forward recognition camera.
Hybrid Vehicle Control ECU Sends a shift position signal to the forward recognition camera.
Brake Booster with Master Cylinder Assembly Skid Control ECU Sends a vehicle speed signal from the speed sensor to the forward recognition camera.
Main Body ECU (Multiplex Network Body ECU) Sends country specification information signals to the forward recognition camera.
Airbag ECU Assembly Yawrate Sensor Detects the yaw rate and lateral/longitudinal deceleration of the vehicle and transmits the signal to the forward recognition camera.
Air Conditioning Amplifier Assembly Sends the outside temperature signal to the forward recognition camera.
Central Gateway ECU (Network Gateway ECU) Relays and transmits each CAN communication data signal.



FUNCTION


a.

The RSA system recognizes the following traffic signals using the forward recognition camera.

Category Sign Type Example of Recognizable Sign
Speed Limit Round maximum speed limit/End of speed limit
Y180848

No Overtaking No overtaking/End of no overtaking
Y180849

Supplemental Signs Road condition signs Ramp Way
Y180850

Rain
Y180851

Wet
Y224423

Ice
Y180852

End of Prohibition
Y180854



b.

The RSA system recognizes the following traffic signals using the forward recognition camera.

Category Display Example Details
Speed Limit Related
Y180855

·

Informs the driver of the maximum speed limit of the currently driven road.

·

The displayed sign reflects the speed limit on the recognized sign.


No Overtaking Related
Y180856

Informs the driver when they are in a no overtaking zone on the currently driven road.
All Canceled (All restrictions canceled. Return to default road regulations.)
Y180854

Informs the driver when all applicable prohibitions, such as speed limit and no overtaking, have ended.
Speed Limit with Supplemental Sign Related Ramp Way
Y180858

Informs the driver of the ramp way direction. However, this item is not displayed when making a lane change without operating the turn signal light.
Rain
Y180859

Y224424

Informs the driver of the maximum speed limit on the currently driven road when it is raining or the road surface is wet.

Speed Limit with Supplemental Sign Related Ice
Y180860

Informs the driver of the maximum speed limit on the currently driven road when there is accumulated snow or ice.
Blank
Y180853

The display is blank when the system is unable to recognize a supplemental sign.


c.

Notification functions are used in the RSA system which invert the colors of displayed signs, flash signs, etc. to notify the driver.

i.

Speed Limit Exceeded Notification

·

While a speed limit sign is displayed, if the actual vehicle speed exceeds the speed limit plus a designated threshold*, the colors of the displayed sign are inverted. For example, if the threshold is set to 5 km/h and the speed limit sign is 60 km/h, the colors of the displayed sign are inverted when the actual vehicle speed exceeds 65 km/h. Furthermore, the system also inverts a speed limit sign with supplemental sign in the same way. However, the system does not invert the colors of the supplemental sign.

·

The buzzer may be set to sound during notifications through the customization function. However, if a speed limit recognized from a speed limit with supplemental sign is exceeded, the buzzer does not sound.

HINT:

*: The threshold can be adjusted to 1 of 3 levels through the customization function.



Notification Method Display Example
Inverted Display
Y224425



ii.

No Overtaking Notification

·

While a no overtaking sign is displayed, if the system detects that the vehicle is attempting to overtake another vehicle, the system flashes the displayed sign.

·

The buzzer may be set to sound during notifications through the customization function.


Notification Method Display Example
Flashing Display
Y180862




d.

The RSA can be turned on or off through the settings tab of the multi-information display.


e.

A customization function is used for the RSA, which allows settings such as the notification method and level for exceeding the speed limit to be changed. Setting changes are made through the customization tab of the multi-information display. Refer to the Repair Manual for details.



SYSTEM CONTROL


a.

RSA Control Pattern 1

i.

After a road sign is recognized by the forward recognition camera and the vehicle passes by, the sign is displayed on the multi-information display.


ii.

While a sign is displayed on the multi-information display or main display, if a new road sign is not recognized within a specified distance, display of the current sign is turned off.

Y217750E02
2.313,0.313 2.458,0.313 2.458,0.313 2.656,1.385 true 0.896,0.229 2.323,0.5 1.427,0.271 10 false Road Sign Recognized 3.875,0.365 5.521,0.615 1.646,0.25 10 false Specified Distance Driven 0.969,2.656 2.469,2.906 1.5,0.25 10 false : Sign display off 0.969,3.198 2.469,3.448 1.5,0.25 10 false : Sign display on



b.

RSA Control Pattern 2

i.

When the power switch is turned off while a sign is displayed on the multi-information display, the same sign is displayed when the power switch is turned ON again.

Y217751E02
1.156,2.969 3.76,3.167 2.604,0.198 10 false : Sign display on 2.5,0.333 3.531,0.719 1.031,0.385 10 false Power Switch is Turned Off 5.604,0.313 6.635,0.729 1.031,0.417 10 false Power Switch is Turned On (IG)



c.

RSA Control Pattern 3

i.

While a sign is displayed on the multi-information display, the sign is turned off when turning left or right onto a new road.

Y217752E02
0.823,4.313 3.573,4.51 2.75,0.198 10 false : Sign display off 0.844,5.052 3.594,5.25 2.75,0.198 10 false : Sign display on 5.521,3.823 6.958,4.26 1.438,0.438 10 false Road Sign Recognized




CONSTRUCTION


a.

Forward Recognition Camera

i.

The forward recognition camera is composed of a monocular camera and Forward Recognition Camera ECU.


ii.

The RSA is controlled by the monocular camera sensor and forward recognition camera ECU.

Y183042C01
1.792,0.521 1.99,0.521 1.99,0.521 3.771,1.052 true 4.573,1.333 6.188,1.969 6.188,1.969 6.469,1.969 true 1.583,0.448 1.854,0.615 0.271,0.167 10 false *a 6.51,1.885 6.781,2.073 0.271,0.188 10 false *b
*a Monocular Camera Sensor *b Forward Recognition Camera (with Built-in Forward Recognition Camera ECU)




b.

Monocular Camera Sensor

i.

Road signs captured by the monocular camera are output to the forward recognition camera ECU.


ii.

The forward recognition camera ECU judges road signs recognized by the monocular camera sensor and displays information based on these judgments on the multi-information display.

Y180869E05
1.875,0.917 2.167,0.229 2.167,0.229 2.333,0.229 true 2.427,1.74 2.844,0.646 2.844,0.646 3.01,0.646 true 4.76,1.854 4.875,0.469 4.875,0.469 5.042,0.469 true 2.375,0.167 3.094,0.344 0.719,0.177 10 false Road Sign 3.104,0.594 4.802,0.823 1.698,0.229 10 false Image Processing Range 5.115,0.385 6.979,0.594 1.865,0.208 10 false Forward Recognition Camera 3.469,4.052 4.667,4.802 1.198,0.75 10 false Judgment of Road Sign Captured by Monocular Camera 5.49,5.208 6.552,5.583 1.063,0.375 10 false Multi-information Display 0.615,5.365 2.458,5.708 1.844,0.344 10 false Image Captured by Monocular Camera 1.948,6.188 3.885,6.375 1.938,0.188 10 false Forward Recognition Camera 3.49,5.365 4.76,5.802 1.271,0.438 10 false Forward Recognition Camera ECU



c.

When one of the following operations is conducted, the forward recognition camera angle must be adjusted. For details, refer to the Repair Manual.

i.

The forward recognition camera is removed and reinstalled or replaced.


ii.

Parts relating to the tires or suspension are replaced or adjusted.


iii.

Strong force is applied onto the forward recognition camera.




OPERATION


a.

Combination Meter Sub-assembly

i.

The combination meter sub-assembly displays recognized signs on the multi-information display based on information of road signs recognized by the forward recognition camera.


ii.

The RSA system display mode can be selected by switching the display mode of the multi-information display through operation of the multi-information switch of the steering pad switch assembly.


iii.

When the driving assist system information tab is selected for display on the multi-information display, road signs recognized by the forward recognition camera are displayed on the upper portion of the multi-information display.


iv.

A maximum of 2 signs can be displayed simultaneously. When 2 signs are displayed, the signs are displayed in the following order from upper to lower: speed limit related, speed limit with supplemental sign related and no overtaking related.

Y224426C01
5.313,1.875 5.625,2.031 0.313,0.156 10 false *a 5.896,1.896 6.208,2.052 0.313,0.156 10 false *b 6.469,1.885 6.781,2.042 0.313,0.156 10 false *c 0.156,3.531 0.469,3.688 0.313,0.156 10 false *d
*a Speed Limit Related *b Speed Limit with Supplemental Sign Related
*c No Overtaking Related *d The illustration shown is an example only. The illustration may differ from the actual vehicle screen.



v.

When an information tab other than the driving assist system information tab is selected for display on the multi-information display, road signs recognized by the forward recognition camera are displayed as pop-ups at right end of the main display. Furthermore, the pop-up display is only for speed limit signs. It is not displayed for no overtaking signs and speed limit with supplemental signs.

Y217749C01
3.813,2.979 4.125,3.135 0.313,0.156 10 false *a 0.073,3.552 0.385,3.708 0.313,0.156 10 false *b
*a Multiple Road Signs Recognized *b The illustrations shown are examples only. The illustrations may differ from the actual vehicle screens.



vi.

When there is a malfunction in the RSA system or the system is temporarily unusable, a warning message is displayed on the multi-information display, the master warning light illuminates and the buzzer sounds.

Condition Multi-information Display
Y124297

Buzzer
System Malfunction CHECK RSA SYSTEM Illuminates Sounds
Forward recognition camera is temporarily malfunctioning
·

Forward recognition camera voltage is abnormal

·

Forward recognition camera temperature is outside of operating range

·

Other malfunction exists in forward recognition camera


FRONT CAMERA
UNAVAILABLE
- -
Forward recognition camera lens or windshield glass is dirty. FRONT CAMERA
UNAVAILABLE
REMOVE DEBRIS
ON WINDSHIELD
- -




DIAGNOSIS


a.

If a malfunction is detected in the RSA system the forward recognition camera. cancels the RSA, sounds the buzzer in the combination meter sub-assembly, and displays a message on the multi-information display to inform the driver of the malfunction.


b.

At the same time, the malfunction is stored in memory as a Diagnostic Trouble Code (DTC). When a Global TechStream (GTS) is connected to the DLC3, the DTC can be read. For details, refer to the Repair Manual.