Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE IMMOBILISER SYSTEM › from 2017.12
NM2070E _58 Vehicle Interior _061886 THEFT DETERRENT / KEYLESS ENTRY _0301429 ENGINE IMMOBILISER SYSTEM UN GENERAL/CONTROL/DETAILS F

THEFT DETERRENT / KEYLESS ENTRY  ENGINE IMMOBILISER SYSTEM  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

The engine immobiliser system compares the ID code that is registered in the ID code box (immobiliser code ECU) with the ID code of the transponder chip that is embedded in the electrical key transmitter sub-assembly. The system unsets if these ID codes match. Thus, the ID code box (immobiliser code ECU) and the certification ECU (Smart Key ECU Assembly) communicate with each other enabling the hybrid control system to start.

HINT:

When replacing the ID code box (immobiliser code ECU) or making a new electrical key transmitter sub-assembly, key recognition code(s) must be registered. For details, refer to the Repair Manual.