Home › Drivetrain › P410 (HYBRID TRANSMISSION / TRANSAXLE) › ELECTRONIC SHIFT LEVER SYSTEM › 2017.12–2020.08
NM2070E _52 Drivetrain _061867 P410 HYBRID TRANSMISSION / TRANSAXLE _0301406 ELECTRONIC SHIFT LEVER SYSTEM UN GENERAL/CONTROL/DETAILS F

P410 HYBRID TRANSMISSION / TRANSAXLE  ELECTRONIC SHIFT LEVER SYSTEM  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

The electronic shift lever system is a shift control system using shift-by-wire technology.


b.

This system judges the vehicle operating conditions based on the information from various sensors, switches and ECUs, and activates appropriate shift control in accordance with the driver's shift lever and P position switch (transmission shift main switch) operation.


c.

A compact shift lever (shift lock control unit assembly) is used. It is a momentary type mechanism with a shift lever that returns to the home position when the driver's hand is released from the shift knob after a shifting operation. It can be shifted with a fingertip, and the ergonomically designed shifting pattern offers excellent ease of operation.


d.

Shift lever position sensors (shift/select) provided in the shift lever (shift lock control unit assembly) detect the shift lever position (R, N, D or B) and send signals to the hybrid vehicle control ECU. The hybrid vehicle control ECU controls the speed of the engine, Motor Generator No. 1 (MG1) and Motor Generator No. 2 (MG2), in order to produce an optimal gear ratio.


e.

The hybrid vehicle control ECU selects the shift state in accordance with the signals from the shift lever position sensors.


f.

With this system, when the driver presses the P position switch (transmission shift main switch), P position control actuates the shift control actuator assembly located in the hybrid vehicle transaxle assembly in order to mechanically lock the parking gear, which engages the parking lock.

X101446E14
5.708,2.927 5.635,2.927 5.635,2.927 5.396,3.417 true 2.281,3.75 3.656,4.156 1.375,0.406 10 false Inverter with Converter Assembly 0.26,0.219 2.115,0.583 1.854,0.365 10 false Shift Lever (Shift Lock Control Unit Assembly) 5.76,2.833 7.104,3.229 1.344,0.396 10 false Shift Control Actuator Assembly 0.344,0.99 2.031,1.375 1.688,0.385 10 false Shift Lever Position Sensor (Shift Sensor) 0.354,1.885 2.031,2.271 1.677,0.385 10 false Shift Lever Position Sensor (Select Sensor) 2.51,1.313 3.448,1.781 0.938,0.469 10 false Hybrid Vehicle Control ECU 4.906,1.135 5.781,1.698 0.875,0.563 10 false Transmission Control ECU Assembly 4.76,3.698 6.073,4.104 1.313,0.406 10 false Hybrid Vehicle Transaxle Assembly 0.344,2.865 2.031,3.479 1.688,0.615 10 false P Position Switch (Transmission Shift Main Switch)


g.

When the accelerator pedal is depressed with the power switch on (READY) and neutral (N) selected, a buzzer sounds in the combination meter sub-assembly to inform the driver.


h.

The P position request indicator blinks and the buzzer sounds to warn the driver when the power switch is on (READY), neutral (N), drive (D) or brake (B) is selected, and the driver door is opened.*1

*1: Models without multi-information display


i.

The master warning light blinks, the buzzer sounds, and a warning message is displayed on the multi-information display to warn the driver when the power switch is on (READY), neutral (N), drive (D) or brake (B) is selected, and the driver door is opened.*2

*2: Models with multi-information display