Home › Engine / Hybrid System › 2ZR-FXE (INTAKE / EXHAUST) › EXHAUST SYSTEM › from 2020.08
NM2070E _51 Engine / Hybrid System _061863 2ZR-FXE INTAKE / EXHAUST _0301399 EXHAUST SYSTEM UN GENERAL/CONTROL/DETAILS F

2ZR-FXE INTAKE / EXHAUST  EXHAUST SYSTEM  GENERAL/CONTROL/DETAILS  DETAILS  


CONSTRUCTION


a.

Exhaust Manifold

i.

The exhaust manifold is made of stainless steel to reduce weight and improve rust resistance.


ii.

Cooling holes are provided in the heat insulator to reduce the exhaust manifold surface temperature, improving durability.

W101565E03
4.646,3.292 5.219,3.646 5.219,3.646 5.292,3.646 true 5.083,1.031 5.521,0.594 5.521,0.594 5.583,0.594 true 1.51,1.708 0.917,1.083 0.917,1.083 0.844,1.083 true 3.26,1.01 2.76,0.281 2.76,0.281 2.677,0.281 true 2.885,1.396 2.208,0.625 2.208,0.625 2.115,0.625 true 1.698,2.083 2.271,2.906 2.271,2.906 2.344,2.906 true 4.375,1.875 5.406,1.677 5.406,1.677 5.479,1.677 true 3.76,2.24 5.375,2.125 5.375,2.125 5.438,2.125 true 2.521,0.177 2.719,0.385 0.198,0.208 10 false *3 1.958,0.531 2.156,0.74 0.198,0.208 10 false *2 0.677,0.979 0.875,1.188 0.198,0.208 10 false *1 5.313,3.552 5.51,3.76 0.198,0.208 10 false *7 2.396,2.823 2.594,3.031 0.198,0.208 10 false *8 5.615,0.5 5.938,0.708 0.323,0.208 10 false *4 5.51,1.583 5.833,1.792 0.323,0.208 10 false *5 5.479,2.031 5.802,2.24 0.323,0.208 10 false *6

Text in Illustration
*1 No. 1 Exhaust Manifold Heat Insulator *2 EGR Pipe
*3 EGR Pipe Gasket *4 Exhaust Manifold To Head Gasket
*5 Exhaust Manifold *6 Air Fuel Ratio Sensor
*7 No. 2 Exhaust Manifold Heat Insulator *8 Cooling Hole



b.

Exhaust Pipe

i.

The exhaust pipe is made of stainless steel in order to reduce weight, improve rust resistance, and enhance TWC warm-up capability.


ii.

Ball joints are used to join the exhaust manifold to the front exhaust pipe assembly, and the front exhaust pipe assembly to the tail exhaust pipe assembly. As a result, in-vehicle sound has been muffled, vibration has been minimized, and high reliability has been realized.


iii.

2 TWCs are provided at the front of the front exhaust pipe assembly.


iv.

A 2-way exhaust control system is provided to reduce noise and vibration from the main muffler.

W146914E01
1.594,1.521 1.792,0.99 1.792,0.99 1.948,0.99 true 2.406,2.823 2.604,2.292 2.604,2.292 2.76,2.292 true 1.573,3.042 1.771,2.51 1.771,2.51 1.927,2.51 true 1.115,2.896 1.313,2.365 1.313,2.365 1.469,2.365 true 4.938,1.646 5.292,2.563 5.292,2.563 5.448,2.563 true 5.76,1.563 6.031,2.292 6.031,2.292 6.188,2.292 true 4.177,2.427 4.448,3.156 4.448,3.156 4.604,3.156 true 0.49,0.469 0.802,0.667 0.313,0.198 10 false *1 2,0.885 2.313,1.083 0.313,0.198 10 false *2 1.969,2.417 2.281,2.615 0.313,0.198 10 false *3 2.802,2.198 3.115,2.396 0.313,0.198 10 false *4 4.646,3.063 4.958,3.26 0.313,0.198 10 false *5 5.5,2.469 5.813,2.667 0.313,0.198 10 false *6 6.229,2.198 6.542,2.396 0.313,0.198 10 false *7 1.479,0.865 1.792,1.063 0.313,0.198 10 false *a 1.521,2.281 1.833,2.479 0.313,0.198 10 false *3

Text in Illustration
*1 Ball Joint *2 Gasket
*3 TWC *4 Sub Muffler
*5 Front Exhaust Pipe Assembly *6 Tail Exhaust Pipe Assembly
*7 Main Muffler - -
*a Exhaust Gas - -




OPERATION


a.

2-Way Exhaust Control System

i.

A 2-way exhaust control system is used. This system reduces backpressure by opening and closing a variable valve that is enclosed in the main muffler, thus varying the exhaust backpressure.


ii.

The valve opens steplessly in accordance with the operating condition of the engine, thus enabling quieter operation at lower engine speeds, and reducing backpressure at higher engine speeds.


iii.

The control valve is enclosed in the main muffler. When the exhaust gas pressure overcomes the spring pressure, the control valve opens steplessly in accordance with the exhaust gas pressure.


iv.

When Control Valve is Closed (Low Engine Speed)

·

Since the pressure in the main muffler is low, the control valve is closed. Hence exhaust gas does not pass through the bypass passage, and exhaust noise is decreased in the main muffler.



v.

When Control Valve is Open (Middle to High Engine Speed)

·

The valve opens as the engine speed and backpressure in the muffler increase. This allows a large volume of exhaust gas to pass through the bypass passage, thereby substantially decreasing backpressure.


W101530E07
1.542,0.573 1.646,0.573 1.646,0.573 1.813,1.646 true 4.906,0.542 5.01,0.542 5.01,0.542 5.177,1.615 true 0.49,1.646 0.708,1.833 0.219,0.188 10 false *c 1.354,0.469 1.542,0.656 0.188,0.188 10 false *d 5.219,2.104 5.438,2.292 0.219,0.188 10 false *b 4.719,0.438 4.906,0.625 0.188,0.188 10 false *e 1.781,2.125 2,2.313 0.219,0.188 10 false *a 3.896,1.646 4.115,1.833 0.219,0.188 10 false *c

Text in Illustration
*a Low Engine Speed *b Middle to High Engine Speed
*c Exhaust Gas *d Control Valve Closed
*e Control Valve Open - -