Home › General › PREPARATION › HYBRID / BATTERY CONTROL
RM2070E _V1 General _061902 PREPARATION _0301454 HYBRID / BATTERY CONTROL B

PREPARATION  HYBRID / BATTERY CONTROL  EQUIPMENT  


Radiator cap tester -
Torque wrench -
Auxiliary battery -
Insulated gloves -
Tape -
Plastic bag -
Megohmmeter
NOTICE:

Be sure to set the megohmmeter to 500 V when performing this test. Using a setting higher than 500 V can result in damage to the component being inspected.


Milliohmmeter -
Sandpaper -