Home › Engine / Hybrid System › 2ZR-FXE (ENGINE CONTROL) › THROTTLE BODY
RM2070E _51 Engine / Hybrid System _061905 2ZR-FXE ENGINE CONTROL _0301562 THROTTLE BODY G

2ZR-FXE ENGINE CONTROL  THROTTLE BODY  INSPECTION  


PROCEDURE

Hide 22210 1.INSPECT THROTTLE BODY ASSEMBLY

a.
U190501E01
0.308,0.259 0.475,0.421 0.167,0.163 10 *a 2.04,2.572 2.260,2.723 0.221,0.151 10 M+ 2.515,2.572 2.703,2.725 0.188,0.154 10 M- 2.217,2.102 2.14,2.537 false 2.512,2.116 2.578,2.523 false 1.648,1.222 1.884,1.392 0.236,0.170 10 D4

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*a Component without harness connected
(Throttle Body Assembly)

Standard Resistance:
Tester Connection Condition Specified Condition
D4-1 (M-) - D4-2 (M+) 20°C (68°F) 0.3 to 100 Ω


If the result is not as specified, replace the throttle body assembly.