Home › Engine / Hybrid System › 2ZR-FXE (ENGINE CONTROL) › MASS AIR FLOW METER
RM2070E _51 Engine / Hybrid System _061905 2ZR-FXE ENGINE CONTROL _0301564 MASS AIR FLOW METER G

2ZR-FXE ENGINE CONTROL  MASS AIR FLOW METER  INSPECTION  


PROCEDURE

Hide 22204 1.INSPECT MASS AIR FLOW METER

a.
A190679E02
0.754,2.144 1.355,0.719 1.355,0.719 1.43,0.719 false 1.462,0.636 1.637,0.790 0.176,0.153 10 *1

Perform a visual check for any foreign matter on the platinum hot wire (heater) of the mass air flow meter shown in the illustration.

Text in Illustration
*1 Platinum Hot Wire (Heater)

Result:

There is no foreign matter.


If the result is not as specified, replace the mass air flow meter.


b.
U190503E02
2.927,1.427 2.719,0.875 2.719,0.875 2.656,0.875 false 2.771,1.438 2.01,0.875 2.01,0.875 1.927,0.875 false 0.865,0.031 1.01,0.313 0.146,0.281 10 false *1 2.344,0.813 2.646,1 0.302,0.188 10 false THA 1.719,0.792 2.031,0.99 0.313,0.198 10 false E2 1.719,1.51 1.958,1.688 0.24,0.177 10 false D5

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*1 Mass Air Flow Meter

Standard Resistance:
Tester Connection Condition Specified Condition
D5-1 (THA) - D5-2 (E2) -20°C (-4°F) 13.6 to 18.4 kΩ
20°C (68°F) 2.21 to 2.69 kΩ
60°C (140°F) 0.49 to 0.67 kΩ