Home › Engine / Hybrid System › 2ZR-FXE (ENGINE CONTROL) › CAMSHAFT POSITION SENSOR
RM2070E _51 Engine / Hybrid System _061905 2ZR-FXE ENGINE CONTROL _0301565 CAMSHAFT POSITION SENSOR A

2ZR-FXE ENGINE CONTROL  CAMSHAFT POSITION SENSOR  REMOVAL  


CAUTION / NOTICE / HINT

HINT:

Although the part name refers to the No. 1 crank position sensor, this procedure is for the camshaft position sensor.


PROCEDURE

Hide 11101W 2.REMOVE NO. 1 CRANK POSITION SENSOR

a.
U110538

Disconnect the No. 1 crank position sensor connector.


b.

Remove the bolt and No. 1 crank position sensor.