Home › Engine / Hybrid System › 2ZR-FXE (ENGINE CONTROL) › AIR FUEL RATIO SENSOR
RM2070E _51 Engine / Hybrid System _061905 2ZR-FXE ENGINE CONTROL _0301570 AIR FUEL RATIO SENSOR G

2ZR-FXE ENGINE CONTROL  AIR FUEL RATIO SENSOR  INSPECTION  


PROCEDURE

Hide 89467B 1.INSPECT AIR FUEL RATIO SENSOR

a.
U190500E02
1.542,1.146 1.042,0.979 true 1.938,1.125 2.375,0.958 true 1.542,1.438 1.135,1.667 true 0.177,0.042 0.344,0.208 0.167,0.167 10 false *a 2.427,0.875 2.823,1.042 0.396,0.167 10 false HA1A 0.792,0.896 1.021,1.135 0.229,0.24 10 false +B 0.76,1.594 1.094,1.833 0.333,0.24 10 false A1A- 1.656,0.573 1.969,0.823 0.313,0.25 10 false D24

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*a Component without harness connected
(Air Fuel Ratio Sensor)

Standard Resistance:
Tester Connection Condition Specified Condition
D24-1 (HA1A) - D24-2 (+B) 20°C (68°F) 1.6 to 3.2 Ω
D24-1 (HA1A) - D24-4 (A1A-) - 10 kΩ or higher


If the result is not as specified, replace the air fuel ratio sensor.