Home › Engine / Hybrid System › 2ZR-FXE (ENGINE CONTROL) › HEATED OXYGEN SENSOR
RM2070E _51 Engine / Hybrid System _061905 2ZR-FXE ENGINE CONTROL _0301571 HEATED OXYGEN SENSOR A

2ZR-FXE ENGINE CONTROL  HEATED OXYGEN SENSOR  REMOVAL  


PROCEDURE

Hide 51442A 1.REMOVE FRONT NO. 3 ENGINE UNDER COVER

a.
A212293

Remove the 4 clips and front No. 3 engine under cover.


Hide 89465 2.REMOVE HEATED OXYGEN SENSOR

a.
A212294

Disconnect the heated oxygen sensor connector.


b.

Remove the wire harness bracket.


c.

Remove the bolt and separate the wire harness clamp bracket.


d.
A212297

Disconnect the wire harness to remove the wire harness clamp bracket.


e.
A212295E06
1.948,0.865 2.438,0.74 2.438,0.74 2.542,0.74 false 2.573,0.667 2.927,0.917 0.354,0.25 10 true SST

Using SST, remove the heated oxygen sensor.

SST
09224-00010